Architectural Float Glass
Technical Glass float clear
Product Name | Thickness | Light Transmittance Specification | Heat Transmittance Specification |
Noise Reduction |
|||||||
LT% | LR% | SF% | SC | DET% | Uvtr% | ER% | EA% | UG(W/m^2.k) |
Rw(db) |
||
Glass float clear |
3 | 90 | 8 | 88 | 1 | 86 | 67 | 8 | 6 | 5.8 | 29 |
Glass float clear | 4 | 90 | 8 | 87 | 1 | 86 | 64 | 8 | 8 | 5.7 |
30 |
Glass float clear |
6 | 89 | 8 | 84 | 0.97 | 81 | 56 | 7 | 12 | 5.7 |
31 |
Glass float clear | 8 | 88 | 8 | 82 | 0.94 | 78 | 51 | 7 | 15 | 5.6 |
32 |
Glass float clear | 10 | 87 | 8 | 80 | 0.92 | 75 | 47 | 7 | 18 | 5.6 | 34 |
Glass float clear |
12 | 86 | 8 | 78 | 0.9 | 72 | 44 | 7 | 21 | 5.6 |
35 |
Clear Float Glass
Curtain wall Glass Facade
Curtain wall is one of the common facades structure in construction industry. Since the curtain wall is non-structural, does not carry any structural load from the building other than its own dead load weight. the curtain wall is an independent frame assembly that does not brace the building structure and only transfer lateral wind loads to the main building structure.
Double-Glazed Glass
Double-skin Glass Facade
Eco Star Reflective Glass (Low-E)
Low-E coatings have been developed to minimize the amount of ultraviolet and infrared light that can pass through glass without compromising the amount of visible light that is transmitted. Radiant energy is one of the important ways of heat transfer occurs with windows. Reducing the emissivity of one or more of the window glass surfaces improves a window’s insulating properties.
Glass Ardakan
Glass Liya
Glass Salimi
Glass Shower Partition Interior
Importance of separating shower space from other bathroom spaces is couse of using glass shower partision. Using glass in shower patistion give us the ability to separate spaces while keep the area integrated beside that shower partition has several benefits like preventing water spread around and partial energy insulation.
Laminated Glass
Laminated Glass
Architectural Laminated Glass
This product looks just like a normal sheet of glass but has a very different function. Energy savings, reduced noise pollution and protection against UV-radiation damages are drawing consumers' attention more than ever before. These goals can be met by the use of architectural laminated glass sheets (toughened or normal). The laminated glass has practical resistance against severe impact, earthquake, storms and strong winds, since the broken glass particles remain bonded to the laminate interlayer. Architectural laminated glass is produced in various colours and can also be layered with other ornamental or functional objects (wire, fabric, posters, etc.) making it a very versatile type of glass indeed. Nowadays, architectural laminated glass is being widely used in exterior design due to some of its particular advantages: - Vibration tolerance - Quick and easy installation (truss, holder clamp, cable, etc.) - Combinability with other design elements - Decorative coverage of interior surfaces and / exterior facadesLaminated Glass Structure
Patterned (Figured) Glass
Reflective Float Glass
Roof & Floor Glass Interior
The roof with glass visually made the room environment interact with the exterior. This ensures that interior became more pleasant and looks more natural.
Structural Glass can be utilised in roofing areas to create a fully glazed roof to any space or room. useful in internal rooms where external windows are far away or small. Also Structural glass can be used in special cases where a particular roof design need a costume glass structure.
Sheet Glass
Spider Glass Facade
Tempered Glass Structure
Tinted Float Glass
Toughenable Enamelled Glass
Technical Information
Processing Possibilities | Comments | |
Safety | Toughened |
Convection tempering furnace is highly recommended. The enamelled side must be facing upwards. |
Laminated | Laminating via PVB, or EVA films | |
Cutting | Rectangular or circular | Easily cuttable before tempering. |
Shaping and edge finishing | Edge grinding |
Edge grinding should be prosseced before tempering. - enamelled side always facing downwards. |
Drilling |
Edge grinding should be prosseced before tempering. - enamelled side always facing downwards. |
|
Notches | Always before tempering. | |
Special treatments | Sand-blasting | Sand-blasting could be done on both sides before or after tempering. |
Acid-frosting |
Acid etching is available on both sides before or after tempering. (both soft etching & deep etching) |
|
Printing | Any printing is applicable. | |
Bending | Enamelled side always facing away from the mold. |