Axial Evaporative Cooler SE310
| Power Supply | 220 - 240,50 v~Hz | 110 - 120,60 v~Hz |
| Current(high mode) | 0.77 A | 1.6 A |
| Energy class | A | A |
| Length | 650 mm | 650 mm |
| Width | 650 mm | 650 mm |
| Height | 780 mm | 780 mm |
| Net Weight | 30 kg | 30 kg |
| Gross Weight | 31 kg | 31 kg |
| Water Inlet | 1/6 inch | 1/6 inch |
| Electro static painting | √ | √ |
| Metal Type | Galvanized | Galvanized |
| Cooling pad type | Wood wool pad | Wood wool pad |
| Capacity | 1630 cfm | 1630 cfm |
| Power of electro-pump | 1/60 hp | 1/60 hp |
| Power of electro-motor | 1/10 hp | 1/10 hp |
| Function type | Axial fan | Axial fan |
| Water volume | 33 lit | 33 lit |
Cold Plasma for Food Processing
Introduction
Cold Plasma for Food Processing works based on a novel non-thermal food processing technology that uses energetic and reactive gases for mild surface decontamination of foods and packaging materials. In this system, dielectric barrier discharge (DBD) is used as a common method for generation of non-thermal plasma. DBD is electrical discharge between two electrodes which at least one of them is covered by an insulating dielectric barrier. Applying high voltage alternating current leads to the non-thermal DBD plasma generation at atmospheric pressure.
Evaporative Air Cooler Down-Draft
The Evaporative Air Cooler model NTAC3/150D is the first evaporative air cooler produced in Iran. This unit with its unique design has wide use in both household and industrial applications. The polymer body and dramatic weight loss of the device make it resistant to atmospheric conditions and direct light exposure. Using the Higher-efficiency of cellulose evaporative cooling pads causes a high absorbent (water) so adequate cooling will be provided. Moreover, it isn’t necessary to replace the swamp cooler pad each year. The existence of a drain pump in this unit provides the user to drain water automatically in areas with very hard water.
Evaporative Air Cooler Side-Draft
The Evaporative Air Cooler model NTAC9/180F is the first evaporative air cooler produced in Iran. This unit with its unique design has wide use in both household and industrial applications. The polymer body and dramatic weight loss of the device make it resistant to atmospheric conditions and direct light exposure. Using the Higher-efficiency of cellulose evaporative cooling pads causes a high absorbent (water) so adequate cooling will be provided. Moreover, it isn’t necessary to replace the swamp cooler pad each year.
Evaporative Air Cooler Up-Draft
The Evaporative Air Cooler model NTAC9/180U is the first evaporative air cooler produced in Iran. This unit with its unique design has wide use in both household and industrial applications. The polymer body and dramatic weight loss of the device make it resistant to atmospheric conditions and direct light exposure. Using the Higher-efficiency of cellulose evaporative cooling pads causes a high absorbent (water) so adequate cooling will be provided. Moreover, it isn’t necessary to replace the swamp cooler pad each year. The existence of a drain pump in this unit provides the user to drain water automatically in areas with very hard water.
Evaporative Cooler SE280
Power Supply | 220 - 240,50 v~Hz | 110 - 120,60 v~Hz |
| Current(high mode) | 0.9 A | 2.3 A |
Current(low mode) | 0.7 A | 1.8 A |
| Energy class | D | D |
Length | 500 mm | 500 mm |
| Width | 500 mm | 500 mm |
Height | 500 mm | 500 mm |
| Net Weight | 21 kg | 21 kg |
Gross Weight | 21 kg | 21 kg |
| Water Inlet | 1/4 inch | 1/4 inch |
| Electro static painting | √ | √ |
Metal Type | Galvanized | Galvanized |
| Cooling pad type | Wood wool pad | Wood wool pad |
| Air outlet dim | 230 x 255 | 230 x 255 |
| Capacity | 900 cfm | 1080 cfm |
Maximum power of blowing | 1530 m³/h | 1530 m³/h |
Power of electro-pump | 1/60 hp | 1/60 hp |
| Power of electro-motor | 1/3 hp | 1/3 hp |
Function type | Centrifugal | Centrifugal |
Water volume | 22 lit | 22 lit |
Evaporative Cooler SE320
| Power Supply | 220 - 240,50 v~Hz | 110 - 120,60 v~Hz |
| Current(high mode) | 2.2 A | 4.3 A |
| Current(low mode) | 1.8 A | 3.5 A |
| Energy class | D | D |
| Length | 650 mm | 650 mm |
| Width | 650 mm | 650 mm |
| Height | 770 mm | 770 mm |
| Net Weight | 43 kg | 43 kg |
| Gross Weight | 44 kg | 44 kg |
| Water Inlet | 1/4 inch | 1/4 inch |
| Electro static painting | √ | √ |
| Metal Type | Galvanized | Galvanized |
| Cooling pad type | Wood wool pad | Wood wool pad |
| Air outlet dim | 300 x 300 | 300 x 300 |
| Capacity | 1850 cfm | 1850 cfm |
| Power of electro-pump | 1/60 hp | 1/60 hp |
| Power of electro-motor | 1/3 hp | 1/3 hp |
| Function type | Centrifugal | Centrifugal |
| Water volume | 33 lit | 33 lit |
Evaporative Cooler SE400-UD
| Power Supply | 220 - 240,50 v~Hz | 110 - 120,60 v~Hz |
| Current(high mode) | 2.6 A | 5.2 A |
| Current(low mode) | 1.2 A | 2.3 A |
| Energy class | D | D |
| Length | 730 mm | 730 mm |
| Width | 730 mm | 730 mm |
| Height | 870 mm | 870 mm |
| Net Weight | 49 kg | 49 kg |
| Gross Weight | 50 kg | 50 kg |
| Water Inlet | 1/4 inch | 1/4 inch |
| Electro static painting | √ | √ |
| Metal Type | Galvanized | Galvanized |
| Cooling pad type | Wood wool pad | Wood wool pad |
| Air outlet dim | 350 x 345 | 350 x 345 |
| Capacity | 2800 cfm | 3360 cfm |
| Power of electro-pump | 1/60 hp | 1/60 hp |
| Power of electro-motor | 1/3 hp | 1/3 hp |
| Function type | Centrifugal | Centrifugal |
| Water volume | 46 lit | 46 lit |
Evaporative Cooler SE500B
| Power Supply | 220 - 240,50 v~Hz | 110 - 120,60 v~Hz |
| Current(high mode) | 4.1 A | 8.1 A |
| Current(low mode) | 1.8 A | 3.5 A |
| Energy class | B | B |
| Length | 870 mm | 870 mm |
| Width | 870 mm | 870 mm |
| Height | 1030 mm | 1030 mm |
| Net Weight | 74 kg | 74 kg |
| Gross Weight | 75 kg | 75 kg |
| Water Inlet | 1/4 inch | 1/4 inch |
| Electro static painting | √ | √ |
| Metal Type | Galvanized | Galvanized |
| Cooling pad type | Wood wool pad | Wood wool pad |
| Air outlet dim | 490 x 480 | 490 x 480 |
| Capacity | 3900 cfm | 4860 cfm |
| Power of electro-pump | 1/60 hp | 1/60 hp |
| Power of electro-motor | 1/2 hp | 1/2 hp |
| Function type | Centrifugal | Centrifugal |
| Water volume | 66 lit | 66 lit |
Evaporative Cooler SE600-UD
| Power Supply | 220 - 240,50 v~Hz | 110 - 120,60 v~Hz |
| Current(high mode) | 3.8 A | 7.5 A |
| Current(low mode) | 1.7 A | 3.3 A |
| Energy class | D | D |
| Length | 870 mm | 870 mm |
| Width | 870 mm | 870 mm |
| Height | 1030 mm | 1030 mm |
| Net Weight | 75 kg | 75 kg |
| Gross Weight | 76 kg | 76 kg |
| Water Inlet | 1/4 inch | 1/4 inch |
| Electro static painting | √ | √ |
| Metal Type | Galvanized | Galvanized |
| Cooling pad type | Wood wool pad | Wood wool pad |
| Air outlet dim | 490 x 480 | 490 x 480 |
| Capacity | 4000 cfm | 4800 cfm |
| Power of electro-pump | 1/60 hp | 1/60 hp |
| Power of electro-motor | 1/3 hp | 1/3 hp |
| Function type | Centrifugal | Centrifugal |
| Water volume | 66 lit | 66 lit |
Fan
