$0.00
Reflective float glass is made by vacuum magnetron sputtering coating device to form metal or ceramic compound films on the glass surface. It is produced in a variety of beautiful colors for specific applications such as energy consumption control.
Having a reflective surface allows the glass to be able to reflect the solar radiation significantly and affect the control of light and energy stream through the buildings.
Depending on the criteria and desired applications, there are different types of reflective glass with excellent features in Kaveh Group.
Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.
Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.
| Product Name | Thickness | Light Transmittance Specification | Heat Transmittance Specification | Noise Reduction | |||||||
| LT% | LR% | SF% | SC | DET% | Uvtr% | ER% | EA% | UG(W/m^2.k) | Rw(db) | ||
Glass float clear | 3 | 90 | 8 | 88 | 1 | 86 | 67 | 8 | 6 | 5.8 | 29 |
| Glass float clear | 4 | 90 | 8 | 87 | 1 | 86 | 64 | 8 | 8 | 5.7 | 30 |
Glass float clear | 6 | 89 | 8 | 84 | 0.97 | 81 | 56 | 7 | 12 | 5.7 | 31 |
| Glass float clear | 8 | 88 | 8 | 82 | 0.94 | 78 | 51 | 7 | 15 | 5.6 | 32 |
| Glass float clear | 10 | 87 | 8 | 80 | 0.92 | 75 | 47 | 7 | 18 | 5.6 | 34 |
Glass float clear | 12 | 86 | 8 | 78 | 0.9 | 72 | 44 | 7 | 21 | 5.6 | 35 |
| Processing Possibilities | Comments | |
| Safety | Toughened | Convection tempering furnace is highly recommended. The enamelled side must be facing upwards. |
| Laminated | Laminating via PVB, or EVA films | |
| Cutting | Rectangular or circular | Easily cuttable before tempering. |
| Shaping and edge finishing | Edge grinding | Edge grinding should be prosseced before tempering. - enamelled side always facing downwards. |
| Drilling | Edge grinding should be prosseced before tempering. - enamelled side always facing downwards. | |
| Notches | Always before tempering. | |
| Special treatments | Sand-blasting | Sand-blasting could be done on both sides before or after tempering. |
| Acid-frosting | Acid etching is available on both sides before or after tempering. (both soft etching & deep etching) | |
| Printing | Any printing is applicable. | |
| Bending | Enamelled side always facing away from the mold. | |
Reviews
There are no reviews yet.