$0.00
This product is made of a nanocomposite consists of copper alloy reinforced with aluminum oxide nanoparticles with the average size of 10 nm, which are uniformly distributed in the copper matrix. Aluminum oxide is produced through a process in which oxygen reacts with aluminum in the copper lattice in the solid state. This method, in comparison with other techniques, has the best particle size and distribution. Aluminum oxide is very hard, thermally stable and insoluble in copper. These particles not only increase the copper alloy strength but also have no significant effect on reducing the thermal and electrical conductivity of copper. The electrode tips are produced in different male or female types by cold forming process or in some cases by the machining process.
Addition of aluminum oxide nanoparticles increases the hardness and tensile properties of the copper alloy. These features are created through the pinning of dislocations by aluminum oxide nanoparticles, which consequently postpone the crystallization process.
Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.
Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.
Depreciation of the automobile engine because of the increase in temperature and friction is the main challenge in the automobile industry. In this regard, improving the quality of motor oils has always been the main concern of the specialists. Motor oils containing nano additives are the latest technology for protecting and extending the life of automotive engine and oil through mechanical means instead of chemicals, which can deteriorate over time. The nanometer-sized diamonds suspended in the motor oil are completely dispersed in the oil and fill the pores of the metal, helping to sustain an oil film on the inner surfaces of the engine. The nanodiamond ball bearings transform the sliding friction that normally occurs between metal surfaces into rolling friction, thereby reducing heat, wear and engine drag. Lower heat helps to extend the life of the oil, and less engine drag increases fuel mileage.
PARS ENTEGHAL AUTOMATIC II (ATF II) is high quality transmission fluid suitable for many passenger car and heavy-duty automatic transmissions, power steering and hydraulic fluid applications and is certified by Voith Turbo and ZF companies.
Optical mirrors are designed to reflect light in a variety of applications such as light steering, interferometry, imaging, and general applications. These mirrors are widely used in the various industries, especially in the automotive industry. In conventional mirrors, the unwanted light scattering has negative effects on the efficiency and product performance, as far as it reduces the visibility. Nanocoating technology improves the performance of these mirrors, in a way that is minimizing the light scattering.
The latest evolution in the filtration industry is the use of nanotechnology in this field. With this technique, the surface of large cellulosic or synthetic fibers (usually 10 to 30 micrometers in diameter) is covered with a layer of ultra-fine nanofibers (typically 50 to 400 nanometers in diameter). In this method, before the pleating process, the filter paper is covered with a layer of polymeric nanofibers with diameter of 50 to 300 nanometer by using an electric field. Nanofibers form because of the existence of a large potential difference.
PARS DO-ZAMANEH VIDJEH is a premium quality lubricant for 2-stroke motorcycle engines. It is formulated to outstanding engine protection and cleanliness, reliable control against exhaust system blocking and helps to reduce exhaust smoke.
Reviews
There are no reviews yet.