$0.00
This machine used for polishing and whitening of white rice
This machine made up of below items :
Main body, Electro motor, Power box, polisher main hub, Lace, Blades etc.
The machine contains an input and one or two output for rice (due to single or twin model) and one output for soft bran.
White rice enters machine and polish box (space between lace and polisher hub) and because of rubbing between the polishing hub and rice, rice brightened more.
Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.
Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.
| Swing over bed | mm | 528 |
| Swing over cross slide | mm | 370 |
| Distance between centers | mm | 1200 |
| size of hydraulic Chuck | mm | 254 (10") |
| Spindle nose | A2-8 | |
| Spindle bore diameter | mm | 92 |
| Feed Bar capacity | mm | 75 |
| Spindle speed range | rpm | 20~3000 |
| Spindle motor (Mo) | Kw | 13.5 |
| Inner diameter of spindle bearing in front | | mm | 130 |
| Type of Turret | Hydraulic | Angle |
| NO, of tool Holder | 12 | |
| Dimension of tool shank | mm | 25x25 |
| Cross travel (X-axis) | mm | 290 |
| Cross travel (Z-axis) | M/min | 1050 |
| Rapid traverse | M/min | X:20 Z: 24 |
| Type of Tailstock | Hydraulic | Angl. |
| Tailstock traverse | mm | 530 |
| Tailstock quill storke | mm | 100 |
| Tailstock quill diameter | mm | 85 |
| Tailstock quill taper (STD) | MT | #5 |
| SIEMENS SINUMERIK 828D | ||
| Spindle motor (SIMOTIC M) | Kw /Nm/rpm | 15/95 / 1500 |
| Servo motor(X-axis) (Mo) | Kw /Nm/ rpm | 3.3/ 16 / 3000 |
| Servo motor(Z-axis) (Mo) | Kw /Nm/rpm | 3.8/ 18 / 3000 |
| El. motor | HP | 1.7 |
| El. motor | HP | 2 |
| Weight | Kgs | 9800 |
| Dimension (L.W.H) | Cm | 450x200x240 |
| Swing over bed | mm | 500 |
| Swing over cross slide | mm | 2/0 |
| Max. Turing diameter | mm | 300 |
| Distance between centers | mm | 1000 |
| Max length of work | mm | 850 |
| Bed width | mm | 340 |
| Hydraulic chuck Size | mm | 200 / 30 (8") |
| Spindle nose | A6-2 | (DIN 55026) |
| Spindle bore | mm | 50 |
| Bar capacity | mm | 30 |
| Inner diameter of spindle bearing in front | mm | 80 |
| Spindle speed range | rpm | 150-2250 |
| spindle motor | HP | Heo |
| Type of turret | Electric turret | |
| No. of tools | 6 | |
| Dimension of tool shank | mm | 20 x 20 |
| Cross travel (X-axis) | mm | 220 |
| Rapid traverse in X , Z axes | M/min X:8 , | 2:8 |
| Type of tailstock | Hydraulic | |
| Tailstock traverse | mm | 950 |
| Tailstock quill diameter | mm | 70 |
| Tailstock quill storke | mm | 125 |
| Tailstock quill taper | Morse | 5 |
| Hydraulic pump motor | Kw | 15 |
| SIEMENS | SINUMERIK | 808D |
| Inverter spindle control | Kw /V | 5.5 / 380 |
| Servo motor & derive X-axis (SINAMIC V60) | Kw/Nm/rpm | 1.2/6 / 2000 |
| Servo motor & derive Z-axis (SINAMIC V60) | Kw/Nm/rpm | 2/10/2000 |
| Weight | Kg | ~2250 |
| Packing (L.W.H) | Mm | 2500«1370x1700 |
| TECHNICAL SPECIFICATIONS OF VERTICAL MACHINES CENTRE VMC850 , VMC1050 , VMC1250 | |||||
| ITEM \ MODEL | UNIT | VMC 850 | VMC 1050 | VMC 1250 | |
| Table workinq surface | mm | 500 x 1000 | 500 x 1200 | 500 x 1220 | |
| Lonqitudinal travel (X) | mm | 800 | 1050 | 1143 | |
| Cross travel (Y) | mm | 500 | 530 | ||
| Vertical travel (Z) | mm | 610 | 640 | ||
| Soindle nose to table | mm | 100-710 | 150-790 | ||
| Soindle center to column | mm | 550 | |||
| Soindle taper | mm | BT40 | |||
| Soindle speed | rpm | 60-8000 | |||
| Soindle motor | Kw | 9/12 | 9/12 (Hi-Low qear box) | ||
| Guideway | Linear quide way | Box way | |||
| X-Y-Z Rapid traverse | m/min | 36/36/30 | 30/30/20 | ||
| Servo motor(X, Y, Z axes) (Mo) | Nm I rpm | 16 / 3000 | |||
| Coolant pump motor | 2.1HP (P:3.5kq/Cm2,Q100L/min) | ||||
| Tool chanqer & Tool Maqazine type | Umbrella I Pneumatic | ||||
| Cuttinq feed | mm/min | 1-8000 | |||
| No. of tools | 24 | ||||
| Adiacent oockets max. tool dia. | mm | 75 | |||
| Max. tool dia.(without Adiacent tools) | mm | 100 | |||
| Max. tool lenath | mm | 320 | |||
| Max. tool weiqht | Kq | 10 | |||
| Table load caoacitv | Ka | 600 | 800 | 1500 | |
| Machine weiqht | Kq | 5500 | 6000 | 7270 | |
| Floor soace | mm | 2350x 3200 | 2920x 3200 | 2800x 3300 | |
| mm | 030 | 040 | |||
| X-Y-Z Ball scre | w dia. | ||||
| Cutting Capacity For CK45 | Millina | mm | 120 cc/min | 180 cc/mm | |
| Drillina | mm | 030 | 040 | ||
| Taooina | M30 x P3.5 | ||||
| Power suoolv | 380V-50Hz-3oh | ||||
| Possible for 4th axis | Yes | ||||
Reviews
There are no reviews yet.