2EDB-70 Jet Heater
$0.00The Jet Heater Model 2EDB-70 is equipped with Chimney as well as capability of double engine. The unit run on gas and diesel fuel at the same time according to its application and equipped with thermal sensor and flow switch that prevent to temperature rise of 140 degree Celsius (Overheat safety shut-off) and ensure the unit safety. The heater providing the desired warmth and comfort for Greenhouses and industrial due to bring fresh air from outside and exhaust polluting gases through chimney. The existence of 100-liter fuel tank of the unit provides the user to use the operation as a portable. Thermal capacity is 70.000 kcal/h, the quantity of the air flow is 5000 m3 and provide heating space up to 700 – 2000 m3.
3 Blade Circulation Fans NTA363
$0.00The Circulation Fan is designed to the movement of air and uniform temperature and humidity and its ideal for industrial halls, greenhouses, mushroom production halls, Poultry Farms, and Live Stocks. This fan is installed on the ceiling and high altitude below the roof of halls. The circular fan reduces the pressure loss by improving the performance of the main ventilation system and increasing the efficiency of cooling systems (coolers) and pro-fan and heating systems such as a fan heater and jet heater.
4 Blade Circulation Fans NTA447
$0.00The Circulation Fan is designed to the movement of air and uniform temperature and humidity and its ideal for industrial halls, greenhouses, mushroom production halls, Poultry Farms, and Live Stocks. This fan is installed on the ceiling and high altitude below the roof of halls. The circular fan reduces the pressure loss by improving the performance of the main ventilation system and increasing the efficiency of cooling systems (coolers) and pro-fan and heating systems such as a fan heater and jet heater.
4 Blade Circulation Fans NTA457
$0.00The Circulation Fan is designed to the movement of air and uniform temperature and humidity and its ideal for industrial halls, greenhouses, mushroom production halls, Poultry Farms, and Live Stocks. This fan is installed on the ceiling and high altitude below the roof of halls. The circular fan reduces the pressure loss by improving the performance of the main ventilation system and increasing the efficiency of cooling systems (coolers) and pro-fan and heating systems such as a fan heater and jet heater.
6 Blade Circulation Fans NTA657
$0.00The Circulation Fan is designed to the movement of air and uniform temperature and humidity and its ideal for industrial halls, greenhouses, mushroom production halls, Poultry Farms, and Live Stocks. This fan is installed on the ceiling and high altitude below the roof of halls. The circular fan reduces the pressure loss by improving the performance of the main ventilation system and increasing the efficiency of cooling systems (coolers) and pro-fan and heating systems such as a fan heater and jet heater.
Air Inlet
$0.00These types of ducts are located on the upper side of the wall to allow air to be combined with the air in the upper part of the hall. In cold weather, the cold air blends out of the inside with warm air, thus saving fuel and maintaining the desired temperature. The proper airflow is possible when the inlet valves are opened and closed properly.
Axial Evaporative Cooler SE310
$0.00| Power Supply | 220 – 240,50 v~Hz | 110 – 120,60 v~Hz |
| Current(high mode) | 0.77 A | 1.6 A |
| Energy class | A | A |
| Length | 650 mm | 650 mm |
| Width | 650 mm | 650 mm |
| Height | 780 mm | 780 mm |
| Net Weight | 30 kg | 30 kg |
| Gross Weight | 31 kg | 31 kg |
| Water Inlet | 1/6 inch | 1/6 inch |
| Electro static painting | √ | √ |
| Metal Type | Galvanized | Galvanized |
| Cooling pad type | Wood wool pad | Wood wool pad |
| Capacity | 1630 cfm | 1630 cfm |
| Power of electro-pump | 1/60 hp | 1/60 hp |
| Power of electro-motor | 1/10 hp | 1/10 hp |
| Function type | Axial fan | Axial fan |
| Water volume | 33 lit | 33 lit |
Cold Plasma for Food Processing
$0.00Introduction
Evaporative Air Cooler Down-Draft
$0.00The Evaporative Air Cooler model NTAC3/150D is the first evaporative air cooler produced in Iran. This unit with its unique design has wide use in both household and industrial applications. The polymer body and dramatic weight loss of the device make it resistant to atmospheric conditions and direct light exposure. Using the Higher-efficiency of cellulose evaporative cooling pads causes a high absorbent (water) so adequate cooling will be provided. Moreover, it isn’t necessary to replace the swamp cooler pad each year.
The existence of a drain pump in this unit provides the user to drain water automatically in areas with very hard water.
Evaporative Air Cooler Side-Draft
$0.00The Evaporative Air Cooler model NTAC9/180F is the first evaporative air cooler produced in Iran. This unit with its unique design has wide use in both household and industrial applications. The polymer body and dramatic weight loss of the device make it resistant to atmospheric conditions and direct light exposure. Using the Higher-efficiency of cellulose evaporative cooling pads causes a high absorbent (water) so adequate cooling will be provided. Moreover, it isn’t necessary to replace the swamp cooler pad each year.
Evaporative Air Cooler Up-Draft
$0.00The Evaporative Air Cooler model NTAC9/180U is the first evaporative air cooler produced in Iran. This unit with its unique design has wide use in both household and industrial applications. The polymer body and dramatic weight loss of the device make it resistant to atmospheric conditions and direct light exposure. Using the Higher-efficiency of cellulose evaporative cooling pads causes a high absorbent (water) so adequate cooling will be provided. Moreover, it isn’t necessary to replace the swamp cooler pad each year.
The existence of a drain pump in this unit provides the user to drain water automatically in areas with very hard water.
Evaporative Cooler SE280
$0.00|
Power Supply |
220 – 240,50 v~Hz | 110 – 120,60 v~Hz |
| Current(high mode) | 0.9 A |
2.3 A |
|
Current(low mode) |
0.7 A | 1.8 A |
| Energy class | D |
D |
|
Length |
500 mm | 500 mm |
| Width | 500 mm |
500 mm |
|
Height |
500 mm | 500 mm |
| Net Weight | 21 kg |
21 kg |
|
Gross Weight |
21 kg | 21 kg |
| Water Inlet | 1/4 inch |
1/4 inch |
| Electro static painting | √ | √ |
|
Metal Type |
Galvanized | Galvanized |
| Cooling pad type | Wood wool pad |
Wood wool pad |
| Air outlet dim | 230 x 255 | 230 x 255 |
| Capacity | 900 cfm |
1080 cfm |
|
Maximum power of blowing |
1530 m³/h |
1530 m³/h |
|
Power of electro-pump |
1/60 hp | 1/60 hp |
| Power of electro-motor | 1/3 hp |
1/3 hp |
|
Function type |
Centrifugal |
Centrifugal |
|
Water volume |
22 lit |
22 lit |
Evaporative Cooler SE320
$0.00| Power Supply | 220 – 240,50 v~Hz | 110 – 120,60 v~Hz |
| Current(high mode) | 2.2 A | 4.3 A |
| Current(low mode) | 1.8 A | 3.5 A |
| Energy class | D | D |
| Length | 650 mm | 650 mm |
| Width | 650 mm | 650 mm |
| Height | 770 mm | 770 mm |
| Net Weight | 43 kg | 43 kg |
| Gross Weight | 44 kg | 44 kg |
| Water Inlet | 1/4 inch | 1/4 inch |
| Electro static painting | √ | √ |
| Metal Type | Galvanized | Galvanized |
| Cooling pad type | Wood wool pad | Wood wool pad |
| Air outlet dim | 300 x 300 | 300 x 300 |
| Capacity | 1850 cfm | 1850 cfm |
| Power of electro-pump | 1/60 hp | 1/60 hp |
| Power of electro-motor | 1/3 hp | 1/3 hp |
| Function type | Centrifugal | Centrifugal |
| Water volume | 33 lit | 33 lit |
Evaporative Cooler SE400-UD
$0.00| Power Supply | 220 – 240,50 v~Hz | 110 – 120,60 v~Hz |
| Current(high mode) | 2.6 A | 5.2 A |
| Current(low mode) | 1.2 A | 2.3 A |
| Energy class | D | D |
| Length | 730 mm | 730 mm |
| Width | 730 mm | 730 mm |
| Height | 870 mm | 870 mm |
| Net Weight | 49 kg | 49 kg |
| Gross Weight | 50 kg | 50 kg |
| Water Inlet | 1/4 inch | 1/4 inch |
| Electro static painting | √ | √ |
| Metal Type | Galvanized | Galvanized |
| Cooling pad type | Wood wool pad | Wood wool pad |
| Air outlet dim | 350 x 345 | 350 x 345 |
| Capacity | 2800 cfm | 3360 cfm |
| Power of electro-pump | 1/60 hp | 1/60 hp |
| Power of electro-motor | 1/3 hp | 1/3 hp |
| Function type | Centrifugal | Centrifugal |
| Water volume | 46 lit | 46 lit |
Evaporative Cooler SE500B
$0.00| Power Supply | 220 – 240,50 v~Hz | 110 – 120,60 v~Hz |
| Current(high mode) | 4.1 A | 8.1 A |
| Current(low mode) | 1.8 A | 3.5 A |
| Energy class | B | B |
| Length | 870 mm | 870 mm |
| Width | 870 mm | 870 mm |
| Height | 1030 mm | 1030 mm |
| Net Weight | 74 kg | 74 kg |
| Gross Weight | 75 kg | 75 kg |
| Water Inlet | 1/4 inch | 1/4 inch |
| Electro static painting | √ | √ |
| Metal Type | Galvanized | Galvanized |
| Cooling pad type | Wood wool pad | Wood wool pad |
| Air outlet dim | 490 x 480 | 490 x 480 |
| Capacity | 3900 cfm | 4860 cfm |
| Power of electro-pump | 1/60 hp | 1/60 hp |
| Power of electro-motor | 1/2 hp | 1/2 hp |
| Function type | Centrifugal | Centrifugal |
| Water volume | 66 lit | 66 lit |
Evaporative Cooler SE600-UD
$0.00| Power Supply | 220 – 240,50 v~Hz | 110 – 120,60 v~Hz |
| Current(high mode) | 3.8 A | 7.5 A |
| Current(low mode) | 1.7 A | 3.3 A |
| Energy class | D | D |
| Length | 870 mm | 870 mm |
| Width | 870 mm | 870 mm |
| Height | 1030 mm | 1030 mm |
| Net Weight | 75 kg | 75 kg |
| Gross Weight | 76 kg | 76 kg |
| Water Inlet | 1/4 inch | 1/4 inch |
| Electro static painting | √ | √ |
| Metal Type | Galvanized | Galvanized |
| Cooling pad type | Wood wool pad | Wood wool pad |
| Air outlet dim | 490 x 480 | 490 x 480 |
| Capacity | 4000 cfm | 4800 cfm |
| Power of electro-pump | 1/60 hp | 1/60 hp |
| Power of electro-motor | 1/3 hp | 1/3 hp |
| Function type | Centrifugal | Centrifugal |
| Water volume | 66 lit | 66 lit |
Fan
$0.00product specification
- Industrial Wall Fans appropriate for exposed outdoor use
- aluminum blades
- 110 to 220W Power consumption
- on 24 inch (600mm), 26 inch (650 mm) and 30 inch (750 mm) outer diameters
- 3 speed settings
- 11000-1400 rpm speed
- volume air-flow rate is 100 (CBM/Hr)
HA-200 Horizontal Warm Air Furnace
$0.00The Warm Air Furnace HA-200 is a series of air Furnace that designed horizontally (cabins). This series is suitable for greenhouses due to its low height in compare with Vertical one. It’s designed in three models such as Natural Gas, Gasoline and Dual and generated as axial fan and centrifuge according to the order. The thermal capacity is 200.000 kcal/h and it provides heating space up to 2500 – 5000 m3.
The forced Air Furnace HA-200 is a heating system that through the electro fan installed next to the heat exchanger , after vacuum the cooling air from environment and passes cool air through heat exchanger , it causes heat exchanger passed through a heat surface to the environment either directly or through the channeling system. The heat exchanger brings the heat directly by the flame. The unit controls heating automatically and provide a benefit such as intelligent control and safety of fuel and oxygen in compare with past heating system. These forced Air Furnace operate with no open flame and no danger of carbon monoxide poisoning due to complete combustion.
HA-300 Horizontal Warm Air Furnace
$0.00The Warm Air Furnace HA-300 is a series of air Furnace that designed horizontally (cabins). This series is suitable for greenhouses due to its low height in compare with Vertical one. It’s designed in three models such as Natural Gas, Gasoline and Dual and generated as axial fan and centrifuge according to the order. The thermal capacity is 300.000 kcal/h and it provides heating space up to 2500 – 7500 m3.
The forced Air Furnace HA-300 is a heating system that through the electro fan installed next to the heat exchanger , after vacuum the cooling air from environment and passes cool air through heat exchanger , it causes heat exchanger passed through a heat surface to the environment either directly or through the channeling system.
Industrial Fans NTA3140
$0.00The 3Blade 140Fans Niroo Tahvieh Alborz Industrial Fans NTA3140, with the quantity of air flow 44100 m3 has a standard certified. In order to ventilate and proper airflow, industrials fan can be used in areas such as Poultry Farm’s halls, greenhouse, and industrial halls. This unit constructed on steel fan blade and resistance to corrosion and balanced with a fully automatic machine, in order to prevent unwanted vibration. The damper blade position is to be such as to prevent the entry of dust, dirt, and light. A typical centrifugal technology uses automatic duct dampers to open and close.
Industrial Fans NTA6100
$0.00The 6Blade 100Fans Niroo Tahvieh Alborz Industrial Fans NTA6100, with the quantity of air flow 18700 m3 has a standard certified. In order to ventilate and proper airflow, industrials fan can be used in areas such as Poultry Farm’s halls, greenhouse, and industrial halls. This unit constructed on steel fan blade and resistance to corrosion and balanced with a fully automatic machine, in order to prevent unwanted vibration. The damper blade position is to be such as to prevent the entry of dust, dirt, and light. A typical centrifugal technology uses automatic duct dampers to open and close.
Industrial Fans NTA6140
$0.00The 6Blade 140Fans Niroo Tahvieh Alborz Industrial Fans NTA6140, with the quantity of air flow 45380 m3 has a standard certified. In order to ventilate and proper airflow, industrials fan can be used in areas such as Poultry Farm’s halls, greenhouse, and industrial halls. This unit constructed on steel fan blade and resistance to corrosion and balanced with a fully automatic machine, in order to prevent unwanted vibration. The damper blade position is to be such as to prevent the entry of dust, dirt, and light. A typical centrifugal technology uses automatic duct dampers to open and close.
KHG-100 Vertical Warm Air Furnace
$0.00The Warm Air Furnace KHG-100 is designed in three models such as Natural Gas, Gasoline and Dual for large heating space including Sport Halls, industrial halls, and public and etc. The thermal capacity of is 100.000 kcal/h it provides heating space up to 1000 – 2500 m3. The hot Air Furnace KHG-100 is a heating system that through the electro fan installed next to the heat exchanger , after vacuum the cooling air from environment and passes cool air through heat exchanger , it causes heat exchanger passed through a heat surface to the environment either directly or through the channeling system. The heat exchanger brings the heat directly by the flame. The unit controls heating automatically and provide a benefit such as intelligent control and safety of fuel and oxygen in compare with past heating system. These forced Air Furnace operate with no open flame and no danger of carbon monoxide poisoning due to complete combustion.
Exhaust gas is emitted as a result of the combustion of fuels is controlled. The heat exchanger is connected to chimney through the tube in order to release of combustion gases. These units in a large model can be connected to the particular channel in order to heat transfer.
KHG-200 Vertical Warm Air Furnace
$0.00The Warm Air Furnace KHG-200 is designed in three models such as Natural Gas, Gasoline and Dual for large heating space including Sport Halls, industrial halls, and public and etc. The thermal capacity of is 200.000 kcal/h it provides heating space up to 2000 – 5000 m3.
The hot Air Furnace KHG-200 is a heating system that through the electro fan installed next to the heat exchanger , after vacuum the cooling air from environment and passes cool air through heat exchanger , it causes heat exchanger passed through a heat surface to the environment either directly or through the channeling system. The heat exchanger brings the heat directly by the flame.
KHG-300 Vertical Warm Air Furnace
$0.00The Warm Air Furnace KHG-300 is designed in three models such as Natural Gas, Gasoline and Dual for large heating space including Sport Halls, industrial halls, and public and etc. The thermal capacity of is 300.000 kcal/h it provides heating space up to 3000 – 7000 m3.
The hot Air Furnace KHG-300 is a heating system that through the electro fan installed next to the heat exchanger , after vacuum the cooling air from environment and passes cool air through heat exchanger , it causes heat exchanger passed through a heat surface to the environment either directly or through the channeling system. The heat exchanger brings the heat directly by the flame. The unit controls heating automatically and provide a benefit such as intelligent control and safety of fuel and oxygen in compare with past heating system.
Luna Wall Fan
product specification
- motor with 90w power
- Copper Winding
- high strength and safety
- 5 Speed Adjustable
- 56 inch
- With 3 stainless steel blades
- containing a standard product safety certification
MLB-50 Jet Heater
$0.00The Jet Heater Model MLB-50 is a mini-series heater that run on diesel fuel and it consumes 5 liters of gasoline per 1 hour with thermal capacities of 50.000 kcal/h. it’s a great solution for space such as Poultry Farms, industrial halls and Construction workshops. The quantity of the air flow is 2300 m3/h and provide heating space up to 500 – 2000 m3. The unit is suitable for area such as Road Construction Projects, mines, industrial halls and Live Stocks. The unit is equipped with digital thermostat that provides the user’s requirement with a means to regulate the environment. The electro fan (blower) embedded provide heating up to 10 meter which distributes heating uniform. If no heating is required, a fan can be used alone which is the application for corresponding space. The existence of a tan is one of the important capabilities of the present unit as a portable and to move easily to anywhere that you want. The Fuel Gauge in a heater fuel tank indicates the Fuel remaining for users.
NTA 5090 – 10cm Evaporative Nano Cooling Pad
$0.00Relying on the importance of the evaporative cellulose pad used in polymer coolers and other in terms of performance and efficiency as well as product quality enhancement, Niroo Tahvieh Alborz Company has established cooling pad production line (fully automation) with a brand of NTA according to the latest international & national reputable of the standards. Evaporative cooling pads have been used in countries with hot and arid climates which includes high energy and water consumption, environmentally friendly and high-efficiency features.
NTA 7090 – 10cm Evaporative Nano Cooling Pad
$0.00Relying on the importance of the evaporative cellulose pad used in polymer coolers and other in terms of performance and efficiency as well as product quality enhancement, Niroo Tahvieh Alborz Company has established cooling pad production line (fully automation) with a brand of NTA according to the latest international & national reputable of the standards. Evaporative cooling pads have been used in countries with hot and arid climates which includes high energy and water consumption, environmentally friendly and high-efficiency features.
NTA 7090 – 15cm Evaporative Nano Cooling Pad
$0.00Relying on the importance of the evaporative cellulose pad used in polymer coolers and other in terms of performance and efficiency as well as product quality enhancement, Niroo Tahvieh Alborz Company has established cooling pad production line (fully automation) with a brand of NTA according to the latest international & national reputable of the standards. Evaporative cooling pads have been used in countries with hot and arid climates which includes high energy and water consumption, environmentally friendly and high-efficiency features.
QG-125 Jet Heater
$0.00The Jet Heater Model QG-125, with thermal capacity of 100.000 kcal/h is designed to install and operate on industrial and semi-industrial halls workshops in which they have natural air flow ventilation. The thermal efficiency of the present device is extremely high and its fuel consumption is adjusted with the electrical valve.
The Jet heater QG-125 equipped with low-noise axial fans and Self-regulating system for controlling the gas flow to prevent incomplete combustion. The present device operates on Natural Gas (NG) and liquefied petroleum gas (LPG) and the heating space is 1500 – 5000 m3.
QG-25 Jet Heater
$0.00The Jet Heater Model QG-25 is designed to operate on Natural Gas (NG) and liquefied petroleum gas (LPG) in order to use in an industrial and workshop. Portable as the capabilities of the present model, which allows the heater to move and operate under any circumstance. Reduction of electricity and fuel consumption and Lightweight are an important feature of this product. A major application of the present product is in Stretch ceiling, which, due to the Lightweight of the system, and can be changed the direct heat in any position and angle.
QG-65 Jet Heater
$0.00The Jet Heater Model QG-65 is designed to install and operate on industrial and semi-industrial halls workshops in which they have natural air flow ventilation. The thermal efficiency of the present device is extremely high and its fuel consumption is adjusted with the electrical valve.
The Jet heater QG-65 equipped with low-noise axial fans and Self-regulating system for controlling the gas flow to prevent incomplete combustion. It’s operates on Natural Gas (NG) and liquefied petroleum gas (LPG) and the heating space is 400 – 2500 m3.
QG-95 Jet Heater
$0.00The Jet Heater Model QG-95 is designed to install and operate on industrial and semi-industrial halls workshops in which they have natural air flow ventilation. The thermal efficiency of the present device is extremely high and its fuel consumption is adjusted with the electrical valve.
The Jet heater QG-95 equipped with low-noise axial fans and Self-regulating system for controlling the gas flow to prevent incomplete combustion. It’s operates on Natural Gas (NG) and liquefied petroleum gas (LPG) and the heating space is 1000 – 3000 m3.
Triple fuel burner
$0.00|
Model : |
GNT |
| Description : |
Available for: Industrial use with steam or hot water to a medium size, or electroplate ceramic baking heat, light industry, metallurgical, manufacturing cakes and pastries, dairy and hot oil boilers High Efficiency Heat supply:400,000-830,000 Kcal/h Manufactured of high quality parts Ease of installation and commissioning High safety by providing advanced control system low noise Wide range of accessories Minimum dimensions of capacity Fully tested after manufacturing |
|
Company name : |
GarmIran Industrial Group |
| Packaging : |
|
|
Minimum order : |
1 |
| Standard : |
Standard approved by IRAN |
|
Production power : |
