90 Elbew With Trreaded Male Off Take
$0.00
Technical Specifications :
pack | Nom Dia | Code | Discription |
140 | 1/2×20 | 02- 020- 030 | |
100 | 3/4×25 | 03 -025- 030 |
Achaemenid Garden Curb Model 6*45*50 Concrete
$0.00Cement
$0.00Model : | Portland type II |
Company name : | Shargh Cement |
Packaging : | – |
Minimum order : | 1 |
Standard : | – |
Production power : | – |
Cement
$0.00
Model : |
Type 5 |
Company name : |
Ilam Cement |
Packaging : |
|
Minimum order : |
1 |
Standard : |
|
Production power : |
|
Cement
$0.00
Model : |
Excavation |
Company name : |
Tehran Cement |
Packaging : | |
Minimum order : |
1 |
Standard : | |
Production power : |
Cement Type 1-325
$0.00Having a strength class of 325 kg/cm2 and due to its chemical properties, this kind of cement is used in general applications and in all places where no special properties of concrete are considered, e.g., preparation of mortars and concrete structures.
Cement Type 1-425
$0.00Having a strength class of 425 kg/cm2 and due to higher initial and final strength than similar cement, this kind of cement is used in a variety of concrete, reinforced, and unreinforced structures that require relatively early strength, such as columns, roofs, bridge slabs, and heavy and thin precast parts and structures that need fast molding, as well as for concreting in cold weather.
Cement Type 2
$0.00Portland Cement Type 2 is the modified cement that, due to its medium resistance to corrosive environments and having moderate heat of hydration, is used in all general applications and construction of foundations, relatively bulky structures, and environments with medium corrosion degree.
Cement Type 5
$0.00This kind of cement is resistant to sulfate attack. For this, it is used in all places where this property is considered. Portland cement type 2 is generally used when the soil with water that is in contact with the concrete building has a large volume of sulfate salts.
Coin Design Floor Covering Model 3.5*40*40
$0.00
Concrete Block Model 20*20*40
$0.00Concrete Block Model A1 20
$0.00Concrete Block With A Facing Facade Model 200*200*400
$0.00Concrete Curb Model 10*30*500
$0.00Concrete Paving Model 8*16.5*20
$0.00Corner and Studs
$0.00Introduction to corner profiles and studs
The two most widely used products in the construction industry are angles and studs, which differ greatly in appearance and application in the industry.
In the industry, steel profiles are L-shaped. Corner is one of the most important sections used in the building and construction industry which is widely used in steel frames and structures. According to the design presented by the engineers, the corners are used as branches and crushed. Corner joints are used for simple joints in structures. Types of joint joints are: die joint joint, seat joint joint, semi-joint joint, joint joint, etc.
The profile is a steel cross-section made of carbon steel rolling shafts with a horizontal die and two U-shaped vertical wings with rounded curved interior angles. This profile falls into the open profiles group. It is widely used in industrial and construction applications.
Pars Profile Group currently manufactures studs from 300 to 600 mm 2 to 10 mm thick, 6 and 12 m long and 2 to 10 mm 6 mm long 10 mm long studs with the highest quality of the finest raw materials. And markets domestic and foreign markets.
It also informs esteemed customers that the company carries a strip from 0.8mm to 10mm on the order of dear customers.
Door And Window Profile
$0.00Introduction to door and window profiles
The complete set of profiles required for the construction of metal doors and windows of buildings is manufactured and supplied with good quality and excellent dimensional accuracy.
Door & Window Profiles are widely used in the construction industry and are supplied to the domestic and overseas markets at the world class factory of Pars Profiles with the best quality and in different dimensions according to customer’s order.
Erw Black Steel Pipes Metals & Minerals
$0.00Our products comprise of a variety of Electric Resistance Welded (ERW) pipes, with diameters ranging from 12 to 220 mm, and wall thickness of 0.8 to 7.1 mm along with comparable square and rectangle tubes.
Specifications include, but not limited to, ASTM A53, and IRAN standards including 7335, 7337&7338, and 7336.
FLAT Dripper Pipes -Size 20
$0.00Technical Specifications :
Different flow rates available in the following applications:
*Pressure controller (PC)
*Pressure controller-Anti Siphon-Non Drain (PC-AS/ND)
FLAT Dripper Pipes -Size 20
$0.00Different flow rates available in the following applications:
*Pressure controller (PC)
*Pressure controller-Anti Siphon-Non Drain (PC-AS/ND
Forouhar Curb Model 35*50 Concrete
$0.00Grey Ordinary Portland Cement Type 1-425
$0.00Product |
Grey Ordinary Portland Cement Type 1-425 |
Standard |
ASTM C150-05 |
Packing |
50 Kg PP Bag/ 1,500 Kg Jumbo Bag |
Grey Ordinary Portland Cement Type 2
$0.00
Product |
Grey Ordinary Portland Cement Type 2 |
Standard |
ASTM C150-05 |
Packing |
50 Kg PP Bag/ 1,500 Kg Jumbo Bag |
Grey Ordinary Portland Cement Type 5
$0.00Product |
Grey Ordinary Portland Cement Type 5 |
Standard |
ASTM C150-05 |
Packing |
50 Kg PP Bag/ 1,500 Kg Jumbo Bag |
Gypsum board Ygig
$0.00- Blue Board
- Fiber Glass Boards
- Fire and Moisture Resistance
- Fire Resistance Gypsum Board
- Moisture Resistance Gypsum Board (MR)
- Grey Gypsum Board
- Regular Gypsum Board (RG)
Gypsum Tile Ygig
$0.00- YGIG PVC Laminated gypsum Pattern 154
- YGIG PVC Laminated gypsum Pattern 996
- YGIG PVC Laminated gypsum Pattern 238
- YGIG Acoustical Gypsum Tile
- YGIG Acoustical Gypsum Tile and Gypsum Board 6/18R
- YGIG Acoustical Gypsum Tile Square punched
Hard UPVC Construction Sewage Fittings
$0.00Introduction
Unplasticized polyvinyl chloride (UPVC) is one of the lightweight polymers that have high strength and impact resistance. Pipes and fittings made of this material exhibit excellent resistance in corrosive environments. Nano-scale fillers due to their high specific surface area give these polymers unique properties. Addition of nanoparticles to the UPVC polymer improves its mechanical and physical properties. This product is a nanocomposite 90 degree elbow, in which the addition of nanoparticles has improved the impact resistance, thermal stability and Vicat softening temperature.
Hard UPVC Fittings
$0.00Introduction
Hard polyvinyl chloride (UPVC) is used to produce a wide range of plastic pipes and fittings. This material is remarkably resistant to chemical erosion and has a smooth interior surface which improves water flow. UPVC has high chemical resistance across its working temperature range, with a wide range of operating pressures. Due to some features including long-term strength, high stiffness and affordability, UPVC systems are widely used in plastic fittings and pipes. It has been demonstrated that the addition of nanoparticles significantly improves the strength and stiffness of UPVC.
Hard UPVC Pipe
$0.00Introduction
Polyvinyl chloride (PVC) is the third most common synthetic polymer after polyethylene (PE) and polypropylene (PP). PVC is a lightweight plastic that is used in the construction. Addition of lubricants makes this material softer and more flexible than plastics. If no lubricants or plasticizers are added to it, the resulting material is known as UPVC (unplasticized polyvinyl chloride). UPVC has high chemical resistance across its working temperature range, with a wide range of operating pressures. Due to some features including long-term strength, high stiffness and affordability, UPVC systems are widely used in plastic fittings and pipes. It has been demonstrated that the addition of nanoparticles significantly improves the strength and stiffness of UPVC.
Industrial And Scaffold Pipes
$0.00Introduction to industrial pipes and scaffolding
“Industrial pipes and scaffolding pipes are widely used in industrial machinery and equipment and some tools and equipment. Proper ductility and wing strength, precision dimensions and good weldability of industrial pipes and scaffolding have increased its use in various industries. Pars Profiles World Group currently manufactures and manufactures the best quality raw materials for domestic and foreign markets. ”
Jasmine Design Floor Covering Model 40*40 Concrete
$0.00
Oil And Gas Wells Cement Class A Drilling Cement
$0.00Oil And Gas Wells Cement Class A Drilling Cement Application
Row | Type of Cement |
1 | Oil and gas well cement Class A |
2 | Oil and gas well cement Class D |
Oil And Gas Wells Cement Class D Drilling Cement
$0.00Oil And Gas Wells Cement Class D Drilling Cement Application
Row | Type of Cement |
1 | Oil and gas well cement Class A |
2 | Oil and gas well cement Class D |