2 Pack Intermediate Epoxy (HB) Industrial and Protective Paints & Coatings
$0.00This product is an intermediate coat in epoxy system for onshore and offshore structural steel work, installations, pipe work, tank external surfaces and bridges.Because of high solid content, high dry film thickness can be achieved in one coat.
2 Pack Intermediate Epoxy Floor Coating Industrial and Protective Paints & Coatings
$0.002 PACK INTERMEDIATE EPOXY FLOOR COATING
This coating has high chemical and solvent resistance. It also has good mechanical, thermal and electrical properties. So that it is suitable for concrete floor surfaces of industrial manufacture, garage, pharmaceutical industry and etc.
2 Pack Wash Primer Industrial Protective Paints & Coatings
$0.002 Pack Wash Primer
A thin film coating designed mainly as a first coat for galvanized metals and aluminum to promote adhesion of subsequent topcoats. Also it has quick drying time.
Alkyd Resins
$0.00Alkyd resin is the result of the esterification reaction of a polyol and a polyacid and a monovalent fatty acid. In fact, alkyd resin is a polyester with a monovalent fatty acid in their structure. Alkyd resins dividing into three types of long oil, medium oil and short oil depending on the oil length and are used in various industries including construction paints, decorative paints, corrosion-resistant primers, varnishes and inks, furnace paints, automotive paints, etc.
Amino Resins
$0.00Amino resins are etherified by Isobutyl alcohol and n-Butanol. They are used in manufacture of stoving paints along with non-air drying alkyd resins and some of epoxy resins, Nitro-cellulose resins, thermoset acrylics, saturated polyesters and acid drying coatings. In combination with air drying short oil alkyd resins, amino resins can also be used in wood industry.
Aqua, Vinyl Emulsion paint
$0.00AQUA, Vinyl Emulsion paint (Washable)
Product Code: ALCO-4009
AQUA, Vinyl Emulsion paint, is produced based on vinyl acetate Co-polymer Resin, with selected high quality pigments.
Bakelite Powder Resins
$0.00Bakelite molding powder is produced from the combination of phenolic resins (Novolak) and additives such as soot, graphite and other fillers, and are used as electrical insulation in the electrical industry (production of lamp holders, electrical control parts, etc.) as well as Gas meter parts and home appliances.
Crystal, Vinyl Emulsion Paint
$0.00Recommended for
This paint is suitable for use on all interior surfaces such as Plaster, cement, brick, cement composition panels, and wood. This quick-drying paint is environmentally friendly, odor free, easy to apply, excellent coverage, great adhesiveness, durable finish and very pleasant to apply.
Durable Shine,Parquet Lacquer Paints Decorative Paints
$0.00Durable Shine,Parquet Lacquer
Product Code: ALCO-2033
Durable Shine,Parquet Lacquer is based on modified Alkyd resins, formulated with high transparency structure, and is recommended for coating wooden floors, stairs, parquets, and other high wear interior wood surfaces. It’s high adhesion prevents air penetration to the substrate and can withstand furniture’s weight. This lacquer also protects the surface against oil & grease, coffee, tea stains and soft drink spills.
Emulsion Resins
$0.00Acrylic resins are the product of condensation polymerization of acrylic, methacrylic acids and their derivatives. The use of water based resins is one of the appropriate methods to reduce the amount of organic solvents consumed and as a result toxic volatile. Water based acrylic resins are used in paint, concrete, adhesion, textile industries, etc.
Fatty Acid Resins
$0.00Fatty Acid is a carboxylic acid with a long linear aliphatic chain. Natural fatty acid is a pale yellow substance that is obtained during the hydrolysis of fats and oils of vegetable seeds and glycerol separation. The application of this product is in the paint and resin industry, cosmetics, textile and fiber manufacturing.
Heat Resistant Paint (300 ºC)
$0.00Heat Resistant Paint (300 ºC)
This product is based on silicon resin and has very good resistance in wet and industrial conditions. Applying by spray improves the appearance. It has excellent heat resistance up to 300ºC and it is recommended for fireplaces, smokestacks, gas piping, radiators and tanks coating. It has excellent efficiency in hot and wet conditions.
Igloo, Vinyl Emulsion Colorant
$0.00Igloo, Vinyl Emulsion Colorant
Product Code: ALCO-4010
IGLOO, vinyl emulsion colorant, is produced based on Polyvinyl Acetate (P.V.A) resins. All Desired colors and shades can be obtained by adding required percentages of colorant to all types of P.V.A based paints. Due to its resistance against sunlight and UV, it can be used for drawing on wall and textile.
Nanosil Alco-4506 Industrial Paints Catalogue
$0.00Introduction :
An unprotected building can absorb over 1 Liter of water per square ft. in 6 hours during 32 kilometer per hour wind driven rain. A concrete structure will absorb almost 2 liters of water in the similar condition. Rain water absorption causes multiple damage to the structure.
Nanosil Alco-4509 Industrial Paints Catalogue
$0.00Introduction :
An unprotected building can absorb over 1 Liter of water per square ft. in 6 hours during 32 kilometer per hour wind driven rain. A concrete structure will absorb almost 2 liters of water in the similar condition. Rain water absorption causes multiple damage to the structure.
Radiant, Alkyd Varnish
$0.00Radiant, Alkyd Varnish
Product Code: ALCO-2028
Radiant, Alkyd Varnish is produced based on the most updated formulas in paint industry, with compatibility for various climates.
Saturated polyester Resin
$0.00Saturated polyester resin is prepared from esterification reaction of poly acid with poly alcohol and is divided into two groups of liquid saturated polyester (solvent base) and solid saturated polyester. Solvent-based polyester resins are applied in coatings used on metal sheets, can coating, coil coating and automobile paints. They are also used in anti-corrosion coatings on iron- steel structures that have epoxy-based primers.
Solid Epoxy Resin
$0.00Epoxy resins are commonly the product of reaction between epichlorohydrin and bis-Phenol A. By increase in molecular weight and viscosity, they change from a low viscose liquid to a high viscose liquid and finally become solid. Solid epoxy resins are commonly manufactured in flake type, and generally used in production of powder coatings. They exhibit good chemical and mechanical resistance.
Unsaturated Polyester Resins
$0.00Solvent-based polyester resins have excellent characteristics, with a wide range of applications. They have high resistance to abrasion, impact and cracking. They are mostly applied in coatings used on metal sheets, can coating, coil coating and automobile paints. They are also used in anti-corrosion coatings on iron- steel structures that have epoxy-based primers.
Vinyl Ester Resin
$0.00Vinyl ester resin is a thermoset resin and is a product of reaction between Epoxy resin and Ethylene unsaturated carboxylic acids. It shows good mechanical properties of Epoxy resin and good chemical properties of Unsaturated poly ester resin. Epoxy chain in vinyl ester resin improves tensile and flexural strength compared with polyester resin. it also has an excellent resistance to corrosion and hydrolysis.
Vinyl ester resin is applied in manufacture of FRP pipes, GRP, storage tanks, floaters. it is also applied in Pultrusion, RTM and hand lay-up industries.
