Introduction

Lab Electrospinning Unit is a full-automatic laboratory electrospinning instrument which is able to produce different polymer nanofibers. This system makes use of electrostatic and mechanical force to spin fibers from the tip of a fine spinneret. The spinneret is maintained at a positive or negative charge by a DC power supply. When an applied electrostatic charge overcomes the surface tension of the solution, the polymer jet is formed. A rapidly rotating collector results in aligned nanofibers while stationary collector results in randomly oriented fiber mats.

Introduction

Filter plus is a masterpiece filter using sophisticated technology containing silver nanoparticles for significant reduction of harmful substances in shisha smoke and bacteria transferred from the shisha hose. Disposable oral hookah filters cause a remarkable decrease in harmful hookah smokes.

This filter with its Nanoparticles can absorb and separate particles existing in hookah smoke. So far, more than 4,000 chemicals have been found in tobacco that contains compounds such as nicotine, free radicals, harmful gases, volatile organic compounds, aldehydes, aromatics, etc. Most of these compounds cause problems such as cancer and vascular heart disease.

Introduction

PNF Co has an innovational combination of methods to meet textile industries requirement. The most important advantages of the applied technologies are feasibility and efficiency in this problem.

In electro-oxidation process, a kind of electric current applied into the electrolytic reactor causes the colloidal impurities to de-stabilize, resulting in agglomeration and flotation and subsequent removal. Dissolved impurities contributing BOD/COD also get oxidized due to the oxidizing agents released by the electrolytic solution which changes them into a state that is either less colloidal and less emulsified (or soluble). Also, Color has been decreased during this process. PNF Co is using a special coated plate and also power source to improve the operation and also decrease power consumption of the electro-oxidation unit. Electro dialysis unit also is used to remove salts and other ionized contaminants and makes the water suitable for re use.

Plastic Pallet IPL1208/3R

Petrochemical Pallet IPH 1311/6R

Introduction

Faucets and taps contain internal and external sections. The internal sections are usually made of brass and ferrous alloys. Corrosion and abrasion resistance and beautiful appearance for external sections have achieved by applying a variety of coatings. Hard coatings are the common types which have been widely used because of their wear resistance and beautiful colors. Appropriate coatings with proper deposition processes are chosen due to the material of faucets. Nitrides containing simple metal such as TiN, ZrN and CrN are the first generation of PVD hard coatings which have been used for decorative purposes due to their beautiful appearance. Among common methods for deposition of these coatings, different PVD methods (Arc-PVD and sputtering) have become more attractive due to some special properties which can be obtained by them, such as getting nanostructured coating, high speed of production and good coating quality.

Introduction

A detergent is a surfactant or a mixture of surfactants with cleaning properties in dilute solutions. Detergents are commonly available as powders or concentrated solutions. An emulsion is a mixture of two or more liquids that are normally immiscible (unmixable or unblendable). Emulsions are part of a more general class of two-phase systems of matter called colloids. Nanoemulsions are emulsions in which the droplet sizes are less than 100 nm. A typical nanoemulsion contains oil, water and an emulsifier. Since microemulsions are thermodynamically stable systems in equilibrium, they are sensitive to changes in temperature and composition. Therefore, nanoemulsions are attractive for aforementioned applications because they are relatively the least sensitive to physical and chemical changes and they can be kinetically stable over long time scales. This product is an alcohol free nanoemulsion that is used as a detergent for cleaning and polishing a variety of surfaces. The products made by this company are as follows:

• Antibacterial cleaner spray for tablet and mobile
• Glass cleaner spray
• Multifunctional cleaner solution

Box pallet BIP1210/S9L

Box pallet BIP1210/S2R

Introduction

Ink is a liquid or paste that contains pigments or dyes and is used to color a surface to produce an image, text, or design. Ink can be a complex medium, composed of solvents, pigments, dyes, resins, lubricants, solubilizers, surfactants, particulate matter, fluorescents, and other materials. Pigment inks are used more frequently than dyes because they are more color-fast, but they are also more expensive, less consistent in color, and have limited color range than dyes. Pigments are solid, opaque particles suspended in ink to provide color. Pigment molecules typically link together in crystalline structures that are 0.1-2 μm in size and comprise 5-30 percent of the ink volume. Qualities such as hue, saturation, and lightness vary depending on the source and type of pigment.

Introduction

Wear- and corrosion-resistant super-hard nanolayer and nanocomposite coatings are widely applied onto the surface of the turbine and compressor blades in the oil, gas and aerospace industries as an alternative for the conventional coatings. It is worth mentioning that the deposition of above-mentioned coatings is performed by using a Hybrid PVD system which operates based on both cathodic arc and sputtering processes.

Introduction

Dip electrospinning unit (needleless electrospinning) is a large-scale nanofiber producer machine. Unlike conventional electrospinning which uses needle and syringe pump for nanofiber production, in this system, a rotary spinneret is immersed into the polymer solution bath and a high strength electric field is applied to the solution bath and collector. This results in the formation of numerous jets from the spinneret and the nanofibers form on a collector.

Introduction

Desalination is considered as a common solution for the regions with shortage of fresh water resources. There are various methods for brackish and sea water desalination.

PNF Company has developed modified electro dialysis technology as an appropriate and efficient for desalination.

The developed process is an electrochemical technique in which the ionic contaminants are removed from the aqueous solution. In this method, separation of salt from water is conducted in the presence of anionic and cationic membranes under the influence of an electric field. 

Foldable Box Pallet

Introduction

Use of powder paint as an alternative for liquid paint has created a great evolution in the color quality. Liquid paints create environmental pollution because of possessing evaporative chemical solvents during drying, and they are harmful for human health. The powder paint entered to the market for the first time in 1962. Keeping of 100% solid state, in addition to environmental pollution prevention, has offered incomparable quality against liquid paints to the industry. Powder paints are now taken 15% of the market share and compete with traditional liquid paints. Due to environmental laws on pollution and waste removal, replacement of liquid paints with powder paints becomes more important every day.

Introduction

A particulate air filter is a device composed of fibrous materials which removes solid particulates such as dust, pollen, mold, and bacteria from the air. Polyacrylonitrile (PAN) is a versatile polymer used to produce large variety of products including ultra-filtration membranes, hollow fibers for reverse osmosis, fibers for textiles, oxidized PAN fibers. Nanofibers with smaller thickness and higher surface area than that of regular fibers, have enormous applications in filtration. To do it, electrospinning is one of the most attractive and effective processes in the production of continuous nanofibers from synthetic and natural polymers.

Introduction

Extremely hard nanolayer and nanocomposite coatings, resistant to wear, erosion, as well as corrosion, are deposited onto the surface of a variety of forming tools such as die and punch, deep drawing, cold and hot forging, extrusion, die casting, and injection moulding tools to improve the surface quality of the moulds, extend their life span up to 10 times, and enhance their performance remarkably. It is worth mentioning that the deposition of above-mentioned coatings is performed by using a Hybrid PVD system which operates based on both cathodic arc and sputtering processes.