Description:

• Programmable intelligent electronic sensor
• Battery information : 6 volt DC
• Power supply information : 220 to 6 volt AC/DC
• Flow rate time : 0.5 to 4 sec
• The maximum water temperature : Up to 80 ° C
• Low battery notification
• Sensor domain : 18 to 22 cm
• Neoperl M24 silicone aerator
• Flow rate : 12 L/min
• Ultra-Flex® piece wall valve Flexible hoses

Specifications

Portland Cement Type 2 is the modified cement that, due to its medium resistance to corrosive environments and having moderate heat of hydration, is used in all general applications and construction of foundations, relatively bulky structures, and environments with medium corrosion degree.

 Portland cement Type 1-325 Application

It is useable in all Reinforced concrete and Non Reinforced concrete and basically all the cases that need special specs like resistance towards striking Ions and hydration heat are not considered. Because of high primary and final resistance especially in cases that need for faster opening and transferring of formwork of concrete is proposed it is used in building concrete silos as well. Also because of high amount of Phase C3S and as a result of produced heat the cement can be used in winter mild climate and thanks to this , this kind of cement  is used cautiously in hot areas where the danger of  increasing concrete temperature exists.

Float glass is the ordinary glass which is now widely used in our daily lives. Float glass is a kind of flat glass which is made by floating molten glass on a bed of molten metal, typically tin.

The roof with glass visually made the room environment interact with the exterior. This ensures that interior became more pleasant and looks more natural.

Structural Glass can be utilised in roofing areas to create a fully glazed roof to any space or room. useful in internal rooms where external windows are far away or small. Also Structural glass can be used in special cases where a particular roof design need a costume glass structure.

Introduction

Ceramics due to having excellent chemical stability, as well as good appearance are widely used in different places such as hospitals and buildings. Ceramics, unfortunately, do not have antibacterial effect inherently, and the microorganisms reproduce easily on their surfaces, especially in wet environments. Regarding this, the need for frequent washing and the use of disinfectants is necessary. However, the use of these materials not only causes respiratory problems but also leads to the loss of cement and mortar between the ceramics. Therefore, the use of a ceramic which has inherent antibacterial properties can be effective in solving these problems. Zin oxide nanoparticles have antibacterial effect which can kill many types of bacteria. These nanoparticles penetrate into the cell walls of bacteria and microorganisms and prevent their growth and reproduction. These nanoparticles can be mixed with ceramic glaze as an additive.

Description:

• by order
• with Advanced Light Technology
• illuminated by glacier white LED
• pull-out aerator covered
• Neoperl-Cache aerator
• ON/OFF button with automatic off after 45 minutes
• up to 600 mm pull-out length
• swiveling 360° spout
• Ultra-Flex® connection hoses