Power Source Active Fiber Optics

Micro duct Tube closure 

Water proof closures are designed for blown fiber tube cable connection application. A micro duct can be easily connected and distributed from the closure with the use of the connecting side ports. It is a direct bury sealed closure designed for intercepting a micro duct assembly to allow multiple spur-offs to smaller blown fiber tube cables or ducts.

Description

Thick walled micro ducts are designed for direct burial and have superior blowing characteristic. Thanks to the sufficient thickness of the wall, It exempts this type of micro duct from additional protective ducts. Thick walled micro ducts can be branched off easily and the primary tube Can be directly buried as a single micro duct. Also this solution makes networks. Distribution possible with a simple connector. Any size and color are available on request. This product is usually recommended to the site which requires fast and easy sheath cutting during fiber branch off from the FCP.

Optical Termination Outlet (OTO)

The OTO is an optical telecommunication outlet box, designed for low bend fibers and it is used to Connect up to two optical fibers to the passive-optical interface in the living area (Fiber to The Home). The optical interface can be chosen between SC simplex or LC duplex. The adapters are equipped with a laser protection.

Item	Standard
Capacity	2 Core
Operating Temperature	-40~ +75
Adaptor	SC & LC

Power meter: FPM-302 

The EXFO FPM-302-FOA-54 Fiber optic Power Meter SC is a handheld optical power meter with an SC connector configuration that that can be used to examine a variety of electrical and fiber optic networks. It integrates the FLS-300 Light Source and FOT-300 Optical Loss Test Set to increase its versatility and breadth in troubleshooting and evaluating installations. These units can be used to transmit a wavelength-identification digital encrypted protocol which allows the FPM-302 to use the proper calibration parameters, decreasing error and making communications simpler. The FPM-302 line is capable of testing PONs at the 1310, 1490, and 1550 nm wavelengths with a power range of 10 to -60 dBm (uncertainty of ±5%) and a resolution of 0.01 dB. This device is also capable of performing automatic offset nulling, automatic wavelength recognition, tone detection at a 270Hz level, and has a refresh rate of 3Hz. The FPM-302 offers a total of ten calibrated wavelengths with the associated reference values and has power autonomy measured at over 300 hours.