Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.
Network Patchcord Cat 6 & Cat 5 Network Equipment Fiber Optics
$0.00
Cat 6 & Cat 5 network patch cable is the cost-effective solution for indoor data center applications, supporting up to 1000BASE-T within 100m and 10 Gigabit Ethernet over the limited distance specified in the industry. And it is fully backward compatible with all the previous categories.
A Cat5 or Cat6 cable is often used in homes. The big difference between Cat5 and Cat6 cables is the amount of data that can be sent. Cat6 has a higher bandwidth compared to Cat5.
The most important features of our product is:
- Simple installation, durable when it comes to impact and abrasion
- High-precision twisted cable, reducing resistance and allowing for a better flow of electrons
- Providing superior structural integrity, and reducing low frequency external interference
- Built to withstand high levels of stress, pulling, and pushing
MAECENAS IACULIS
ADIPISCING CONVALLIS BULUM
- Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
- Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
- Diam parturient dictumst parturient scelerisque nibh lectus.
Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.
Related products
Attenuator Male/Female Fiber Optics
Item |
standard |
Operation wavelength (NM) |
1310/1550 |
connector |
FC , SC ,ST ,LC , MU |
Attenuation (DB) |
1~30 |
Return Loss (DB) |
PC≥45, UPC≥ 50 , APC ≥60 |
Attenuation Accuracy (DB) |
+/- 0.5 (1-10 db), +/-1.0 (11-30 db) |
Polarization Dependent loss |
≤0.2 db |
Operation Temperature (C) |
- 40 ~+80 |
Storage Temperature (C) |
- 50 ~ +85 |
SC Adaptor Passive Fiber Optics
OTO BOX Code 001 OTO BOX GPON Fiber Optics
Optical Termination Outlet (OTO)
The OTO is an optical telecommunication outlet box, designed for low bend fibers and it is used to Connect up to two optical fibers to the passive-optical interface in the living area (Fiber to The Home). The optical interface can be chosen between SC simplex or LC duplex. The adapters are equipped with a laser protection.
Item |
Standard |
Capacity |
2 Core |
Operating Temperature | -40~ +75 |
Adaptor |
SC & LC |
Power Meter Active Fiber Optics
Power meter: FPM-302
The EXFO FPM-302-FOA-54 Fiber optic Power Meter SC is a handheld optical power meter with an SC connector configuration that that can be used to examine a variety of electrical and fiber optic networks. It integrates the FLS-300 Light Source and FOT-300 Optical Loss Test Set to increase its versatility and breadth in troubleshooting and evaluating installations. These units can be used to transmit a wavelength-identification digital encrypted protocol which allows the FPM-302 to use the proper calibration parameters, decreasing error and making communications simpler. The FPM-302 line is capable of testing PONs at the 1310, 1490, and 1550 nm wavelengths with a power range of 10 to -60 dBm (uncertainty of ±5%) and a resolution of 0.01 dB. This device is also capable of performing automatic offset nulling, automatic wavelength recognition, tone detection at a 270Hz level, and has a refresh rate of 3Hz. The FPM-302 offers a total of ten calibrated wavelengths with the associated reference values and has power autonomy measured at over 300 hours.Micro Duct Tube Closure Fiber Blowing Equipment
Micro duct Tube closure
Water proof closures are designed for blown fiber tube cable connection application. A micro duct can be easily connected and distributed from the closure with the use of the connecting side ports. It is a direct bury sealed closure designed for intercepting a micro duct assembly to allow multiple spur-offs to smaller blown fiber tube cables or ducts.Power Source Active Fiber Optics
Power Source: FPM-602
Automatically uses the proper calibration parameters when combined with the FLS-300 or FOT-300 source units. With a high-power option and 10 calibrated wavelengths, the FPM-300 is the most complete, yet simple power meter available. Combined with the FLS-300 or FOT-300 source units, which can transmit with a wavelength-identification digital encrypted protocol, the FPM-300 automatically uses the proper calibration parameters. This auto-wavelength recognition feature reduces the need for communication between the two technicians and decreases the potential for error.
Reviews
There are no reviews yet.