$0.00
| Swing over bed | mm | 528 |
| Swing over cross slide | mm | 370 |
| Distance between centers | mm | 8/5 |
| size of hydraulic Chuck | mm | 254 (10″) |
| Spindle nose | A2-8 | |
| Spindle bore diameter | mm | 92 |
| Feed Bar capacity | mm | TS |
| Spindle speed range | rpm | 20~3000 |
| Spindle motor (Mo) | Kw | 13.5 |
| Inner diameter of spindle bearing in front | | mm | 130 |
| Type of Turret | Hydraulic | Angle |
| NO, of tool Holder Ha | 12 — Z | |
| Dimension of tool shank | mm | 25×25 |
| Cross travel (X-axis) | mm | 290 |
| Cross travel (Z-axis) | M/min | 1050 |
| Rapid traverse | M/min | X:20 Z: 24 |
| Type of Tailstock | Hydraulic | Angl. |
| Tailstock traverse | mm | 530 |
| Tailstock quill storke | mm | 100 |
| Tailstock quill diameter | mm | 85 |
| Tailstock quill taper (STD) | MT | #5 |
| SIEMENS SINUMERIK 828D | ||
| Spindle motor (SIMOTIC M) | Kw /Nm/rpm | 15/95 / 1500 |
| Servo motor(X-axis) (Mo) | Kw /Nm/ rpm | 3.3/ 16 / 3000 |
| Servo motor(Z-axis) (Mo) | Kw /Nm/rpm | 3.8/ 18 / 3000 |
| El. motor | HP | 1.7 |
| El. motor | HP | 2 |
| Weight | Kgs | 6200 |
| Dimension (L.W.H) | Cm | 418x203x236 |
Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.
Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.
| TECHNICAL SPECIFICATIONS OF VERTICAL MACHINES CENTRE VMC850 , VMC1050 , VMC1250 | |||||
| ITEM \ MODEL | UNIT | VMC 850 | VMC 1050 | VMC 1250 | |
| Table workinq surface | mm | 500 x 1000 | 500 x 1200 | 500 x 1220 | |
| Lonqitudinal travel (X) | mm | 800 | 1050 | 1143 | |
| Cross travel (Y) | mm | 500 | 530 | ||
| Vertical travel (Z) | mm | 610 | 640 | ||
| Soindle nose to table | mm | 100-710 | 150-790 | ||
| Soindle center to column | mm | 550 | |||
| Soindle taper | mm | BT40 | |||
| Soindle speed | rpm | 60-8000 | |||
| Soindle motor | Kw | 9/12 | 9/12 (Hi-Low qear box) | ||
| Guideway | Linear quide way | Box way | |||
| X-Y-Z Rapid traverse | m/min | 36/36/30 | 30/30/20 | ||
| Servo motor(X, Y, Z axes) (Mo) | Nm I rpm | 16 / 3000 | |||
| Coolant pump motor | 2.1HP (P:3.5kq/Cm2,Q100L/min) | ||||
| Tool chanqer & Tool Maqazine type | Umbrella I Pneumatic | ||||
| Cuttinq feed | mm/min | 1-8000 | |||
| No. of tools | 24 | ||||
| Adiacent oockets max. tool dia. | mm | 75 | |||
| Max. tool dia.(without Adiacent tools) | mm | 100 | |||
| Max. tool lenath | mm | 320 | |||
| Max. tool weiqht | Kq | 10 | |||
| Table load caoacitv | Ka | 600 | 800 | 1500 | |
| Machine weiqht | Kq | 5500 | 6000 | 7270 | |
| Floor soace | mm | 2350x 3200 | 2920x 3200 | 2800x 3300 | |
| mm | 030 | 040 | |||
| X-Y-Z Ball scre | w dia. | ||||
| Cutting Capacity For CK45 | Millina | mm | 120 cc/min | 180 cc/mm | |
| Drillina | mm | 030 | 040 | ||
| Taooina | M30 x P3.5 | ||||
| Power suoolv | 380V-50Hz-3oh | ||||
| Possible for 4th axis | Yes | ||||
| Table working area | mm | 450 x 1600 |
| Table surface load | Kg | 1500 |
| Table rotation in both sides | Deg. | 45 |
| Table longitudinal travel (X) | mm | 1320 |
| Table cross travel (Y) | mm | 345 |
| Knee vertical travel (Z) | mm | 630 |
| Manual Head cross travel (W) | mm | 900 |
| spindle drive power | Kw | 11 |
| Tool taper | ISO | 50 |
| Speeds range | rpm | 28 — 1400 |
| Longitudinal and cross feeds | mm/min | 16 — 800 |
| Vertical feed rate | mm/min | 5 — 250 |
| Drive feed power | Kw | 2.2 |
| Rapid longitudinal and cross travel | mm/min | 3150 |
| Rapid vertical travel (Z) | mm/min | 1000 |
| Power capacity | Kw | 26 |
| Weight | Kg | 4920 |
Reviews
There are no reviews yet.