Type of bearing	Ball, Rolling element and plain bearings
Casing partition	Radially split
Drive frequency	50 / 60 Hz
Type of drive	Electric motor / Diesel Engine
Drive voltage	Low voltage
No. of impeller entries	Single entry
Impeller material	Horizontal Cast Iron, Carbon Steel, St.Steel, Cast Bronze
Type of installation	Long-coupled
Type of coupling	Direct
Type of lubrication	Grease /Oil and product lubrication
Discharge casing material	Cast Iron, Carbon Steel, St.Steel, Cast Bronze
Max. permissible fluid temperature	140 °C
Min. permissible fluid temperature	-10 °C
Nozzle position	Side – Top (or other on request)
Maximum rated pressure (discharge)	PN 16, PN 25, PN 40, PN 63
Pump set location	Dry installed
Shaft material	Carbone Steel, Stainless Steel
Stage casing material	Cast Iron, Carbon Steel, St.Steel, Cast Bronze
Suction casing material	Cast Iron, Carbon Steel, St.Steel, Cast Bronze
Suction characteristics	Non-priming
Type of connection	Flange
Type of discharge casing	Annular casing
Type of stage casing	Stage casing with diffuser
Type of suction casing	Annular casing
Maximum Head	310 m
Minimum Head	20 m
Installation position	Horizontal
Shaft seal type	Mechanical seal, Gland packing
Main applications	Industry and process Engineering, Water supply, Building services
Casing material	Cast Iron Alloys
Maximum discharge-side pressure	40 bar
Maximum drive rating	355 kW (more on request)
Type of installation	Stationary
Maximum flow rate	440 m³/h (more on request)
Minimum flow rate	2 m³/h
Maximum speed of rotation	3500 1/min

MC 200 and CV 200 have these differences:

Maximum discharge-side pressure	96 bar
Maximum drive rating	375 kW
Maximum Head	485 m
Minimum Head	40 m
Maximum flow rate	930 m³/h
Minimum flow rate	120 m³/h
Impeller material	Cast Iron, Cast Bronze
Shaft material	Carbon Steel, Stainless Steel
Casing material	Ductile Cast Iron

Usages:

General and municipal water and drinking water supply
Industry, pressure boosting, irrigation
Power stations
Heating, fire fighting
Reverse Osmosis
Pumping boiler feed water, warm water, hot water, condensate, distillate, solvents, lubricants, fuels, etc.

The characteristic curves

Characteristic Curve for CV 200
Characteristic Curve for MC 200
Characteristic Curve for WKL 80-2900rpm
Characteristic Curve for WKL 65-2900rpm
Characteristic Curve for WKL 50-2900rpm
Characteristic Curve for WKL 40-2900rpm
Characteristic Curve for WKL 32-2900rpm
Characteristic Curve for WKL 80-1450rpm
Characteristic Curve for WKL 65-1450rpm
Characteristic Curve for WKL 50-1450rpm
Characteristic Curve for WKL 40-1450rpm
Characteristic Curve for WKL 32-1450rpm
Characteristic Curve for WKL 150-1450rpm
Characteristic Curve for WKL 125-1450 rpm
Characteristic Curve for WKL 100-1450rpm
Family Curve -1450 rpm
Family Curve -2900 rpm

MAECENAS IACULIS

Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.

ADIPISCING CONVALLIS BULUM

Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
Diam parturient dictumst parturient scelerisque nibh lectus.

Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.

Click to enlarge

Previous product

Heavy Slurry pump (ISO 5199) $0.00

Back to products

Next product

Centrifugal Pumps(ETA Type-ISO5199) $0.00

High Pressure Pump (ISO 5199)

$0.00

Fire Fighting
Water

Product features

Horizontal or vertical, long or close-coupled,
multistage centrifugal pump in ring-section design,
with axial or radial suction nozzle, cast radial impellers.

Category: Industrial Electric Motors

Description
Reviews (0)
Shipping & Delivery

Type of bearing	Ball, Rolling element and plain bearings
Casing partition	Radially split
Drive frequency	50 / 60 Hz
Type of drive	Electric motor / Diesel Engine
Drive voltage	Low voltage
No. of impeller entries	Single entry
Impeller material	Horizontal Cast Iron, Carbon Steel, St.Steel, Cast Bronze
Type of installation	Long-coupled
Type of coupling	Direct
Type of lubrication	Grease /Oil and product lubrication
Discharge casing material	Cast Iron, Carbon Steel, St.Steel, Cast Bronze
Max. permissible fluid temperature	140 °C
Min. permissible fluid temperature	-10 °C
Nozzle position	Side – Top (or other on request)
Maximum rated pressure (discharge)	PN 16, PN 25, PN 40, PN 63
Pump set location	Dry installed
Shaft material	Carbone Steel, Stainless Steel
Stage casing material	Cast Iron, Carbon Steel, St.Steel, Cast Bronze
Suction casing material	Cast Iron, Carbon Steel, St.Steel, Cast Bronze
Suction characteristics	Non-priming
Type of connection	Flange
Type of discharge casing	Annular casing
Type of stage casing	Stage casing with diffuser
Type of suction casing	Annular casing
Maximum Head	310 m
Minimum Head	20 m
Installation position	Horizontal
Shaft seal type	Mechanical seal, Gland packing
Main applications	Industry and process Engineering, Water supply, Building services
Casing material	Cast Iron Alloys
Maximum discharge-side pressure	40 bar
Maximum drive rating	355 kW (more on request)
Type of installation	Stationary
Maximum flow rate	440 m³/h (more on request)
Minimum flow rate	2 m³/h
Maximum speed of rotation	3500 1/min

Maximum discharge-side pressure	96 bar
Maximum drive rating	375 kW
Maximum Head	485 m
Minimum Head	40 m
Maximum flow rate	930 m³/h
Minimum flow rate	120 m³/h
Impeller material	Cast Iron, Cast Bronze
Shaft material	Carbon Steel, Stainless Steel
Casing material	Ductile Cast Iron

Reviews

There are no reviews yet.

Be the first to review “High Pressure Pump (ISO 5199)”

Shipping & Delivery

Related products

Pump type BB1– According to API 610

Design:

Horizontal, axially split, one-and two stage between bearings
Double suction impeller
Single or double volute, depending on size
Diffuser or overflow piece after first stage for two stage execution
Driving from both sides possible
Mechanical seals (single, double, tandem)
Oil lubricated rolling bearings with rotor located by the non drive end for residual hydraulic axial thrust from hydraulically balanced impeller
Radial as well as axial loads can be also taken by oil lubricated bearings

Add to cart

Quick view

Heavy Slurry pump (ISO 5199)

Steel complex and mining

Horizontal, radially split volute casing pump in back pull-out design, with impeller adapted to meet application requirements, single-flow, and single-stage.

Special Features:

Reinforced, axially adjustable bearing assembly on all pumps.
Shaft seal: mechanical seal integrated into the casing cover, or gland packing.
Even cast iron pumps are supplied with pump internals (impeller and wear plate) made of wear-resistant ERN (nickel cast iron).

Vertical line Shaft Pump( ISO 5199)

Fire Fighting
Oil and Gas
Petrochemical
Water
Steel complex and mining
Power Plant

Three Phase One Speed Electro Motors With Aluminum Frame

Dimension (Foot mounting)

Frame No.IEC	HD	H	C	B	BA	K	KB	AB	A	AA	Z	HA	AC	Q	I	L	E	EH	DH	GA	LK	F	D
56	145	56	36	71	19	6	10	112	90	22	76	10	106	55.5	-	189	20	-	-	10.2	12	3	9
63	158	63	40	80	25	7	10	125	100	25	76	10	123	54.5	-	214	23	-	-	12.5	12	4	11
71	175	71	45	90	18	7	10	140	112	28	76	11	138	58	-	241	30	-	-	16	18	5	14
80	194	80	50	100	25	10	14	160	125	35	96	11	156	68.5	-	276	40	-	-	21.5	25	6	19
90L	215	90	56	125	30	10	14	182	140	43.3	96	12	175	70.5	-	325	50	19	M8	27	32	8	24
100L	233	100	63	140	35	12	17	200	160	40	96	12	194	73.5	-	366	60	22	M10	31	40	8	28
112M	256	112	70	140	35	12	17	235	190	45	96	13	217	76.5	200	384	60	22	M10	31	40	8	28
132M	291	132	89	178	40	12	17	260	216	44	116	14	255	90	258	486	80	28	M12	41	56	10	38
160L	340	160	108	254	50	15	21	315	254	64	116	16	303	95.5	345	629	110	36	M16	45	80	12	42

Three Phase Electro Motors With Energy Grade Of IE2

Frame No.IEC	HD	H	C	B	BA	K	KB	AB	A	AA	Z	HA	AC	Q	I	L	E	EH	DH	GA	LK	F	D
80	194	80	50	100	25	10	14	160	125	35	96	11	156	68.5	-	276	40	-	-	21.5	25	6	19
90L	215	90	56	125	30	10	14	182	140	43.3	96	12	175	70.5	-	325	50	19	M8	27	32	8	24
100L	233	100	63	140	35	12	17	200	160	40	96	12	194	73.5	-	366	60	22	M10	31	40	8	28
112M	256	112	70	140	35	12	17	235	190	45	96	13	217	76.5	200	384	60	22	M10	31	40	8	28
132M	291	132	89	178	40	12	17	260	216	44	116	14	255	90	258	486	80	28	M12	41	56	10	38
160L	340	160	108	254	50	15	21	315	254	64	116	16	303	95.5	345	629	110	36	M16	45	80	12	42

Phase Capacitor Run Electro Motors

Dimension (Foot mounting - Flange mounting)

Frame No.IEC	T	S	P	N	M	LA	AK	HD	H	C	B	BA	K	KB	AB	A	AA	HA	AC	Z	Q	I	L	E	EH	DH	GA	LK	F	D	FLANGE SYS.IEC 72-1
56	3	7	120	80	100	8	105	145	56	36	71	19	6	10	112	90	22	10	106	76	55.5	-	189	20	-	-	10.2	12	3	9	FF100
63	3	10	140	95	115	10	106	158	63	40	80	25	7	10	125	100	25	10	123	76	54.5	-	214	23	-	-	12.5	12	4	11	FF115
71	3.5	10	160	110	130	10	110	175	71	45	90	18	7	10	140	112	28	11	138	76	58	-	241	30	-	-	16	18	5	14	FF130
80	3.5	12	200	130	165	12	130	194	80	50	100	25	10	14	160	125	35	11	156	96	68.5	-	276	40	-	-	21.5	25	6	19	FF165
90L	3.5	12	200	130	165	12	137	215	90	56	125	30	10	14	182	140	43.3	12	175	96	70.5	-	325	50	19	M8	27	32	8	24	FF165
100L	4	15	250	180	215	12	145	233	100	63	140	35	12	17	200	160	40	12	194	96	73.5	-	366	60	22	M10	31	40	8	28	FF215
112M	4	15	250	180	215	12	155	256	112	70	140	35	12	17	235	190	45	13	217	96	76.5	200	384	60	22	M10	31	40	8	28	FF215

Pump type OH1-According to API 610 Special

Oil and Gas
Petrochemical
Power Plant

Three-Phase Electro Motors With Cast-Iron Frame

Dimension-Frame Size 100-160 (Foot mounting )

FRAME No. IEC	D	F	GA	DH	EH	E	L	X	I	Q	Z	AC	HA	LK	AA	A	AB	KB	K	BA	B	c	H	HD
I00L	28	8	31	MIO	22	60	367	Pq16	197	67	109	197	14	40	47	160	200	17	12	40.5	140	63	100	268
I00L	28	8	31	MIO	22	60	367	Pq16	112L	67	109	197	14	40	47	160	200	17	12	40.5	140	63	100	268	28	8	31	MIO	22	60	386	Pql6	200	70	109	221	15	40	61	190	235	17	12	40.5	140	70	112	291.5
132M	38	10	41	M12	28	80	487.5	Pq2l	112L	258	84	139	257	15	56	62	216	260	17	12	48.5	178	89	132	28	8	31	MIO	22	60	386	Pql6	200	70	109	221	15	40	61	190	235	17	12	40.5	140	70	112	291.5	337.5
132M	38	10	41	M12	28	80	487.5	Pq2l	160L	258	84	139	257	15	56	62	216	260	17	12	48.5	178	89	132	42	12	45	M16	36	110	629	Pq29	345	111	170	303	20	80	74	254	320	21	14	56	254	108	160	391	337.5