Name: Double Suction Pump (ISO 5199)
SKU: 15598
Availability: InStock

Double Suction Pump (ISO 5199)

$0.00

Usages:

Fire Fighting
Water

Product features

Design:

Axially split, single-stage volute casing pump for
horizontal or vertical installation with double-
entry radial impeller, connection flanges drilled to DIN, ISO, BS or ANSI standards.

Description
Reviews (0)
Shipping & Delivery

Description

Type of bearing	Ball, Rolling element and plain bearings
Casing partition	Axially split
Drive frequency	50 / 60 Hz
Type of drive	Electric motor / Diesel Engine
Drive voltage	Low Voltage, High voltage
No. of impeller entries	Double entry
Impeller material	Cast Iron Alloys, Steel Alloys, Bronze Alloys
Type of installation	Long-coupled
Type of coupling	Direct
Type of lubrication	Grease / Oil lubrication
Max. permissible fluid temperature	105 °C
Nozzle position	In-line
Maximum rated pressure (discharge)	PN 10, PN 16, PN 25
Pump set location	Dry installed
Shaft material	Carbone Steel, Stainless Steel
Suction characteristics	Non-priming
Suitable for drinking water	Yes
Type of casing	Volute casing
Type of Impeller	Closed, Radial
Type of connection	Flange
Casing material	Cast Iron, Ductile Cast Iron, Carbon Steel
Maximum Head	200 m
Minimum Head	7 m
Installation position	Horizontal or Vertical
Shaft seal type	Gland packing, Mechanical seal
Main applications	Industry and process Engineering, Building services, Water supply, Energy
Maximum discharge-side pressure	25 bar
Maximum drive rating	350 kW (and more on request)
Type of installation
TMaximum flow rate	3600 m³/h (and more on request)
Minimum flow rate	90 m³/h
Maximum speed of rotation	3500 1/min

Usages:

Pumping untreated and clean water, service water and seawater in waterworks
Irrigation and drainage pumping stations
Fire fighting Systems
Shipbuilding

Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “Double Suction Pump (ISO 5199)”

Shipping & Delivery

MAECENAS IACULIS

Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.

ADIPISCING CONVALLIS BULUM

Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
Diam parturient dictumst parturient scelerisque nibh lectus.

Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.

Click to enlarge

Previous product

Centrifugal Pumps(ETA Type-ISO5199) $0.00

Back to products

Next product

Axial Flow Electropump (ISO 5199) $0.00

Category: Industrial Electric Motors

Type of bearing	Ball, Rolling element and plain bearings
Casing partition	Axially split
Drive frequency	50 / 60 Hz
Type of drive	Electric motor / Diesel Engine
Drive voltage	Low Voltage, High voltage
No. of impeller entries	Double entry
Impeller material	Cast Iron Alloys, Steel Alloys, Bronze Alloys
Type of installation	Long-coupled
Type of coupling	Direct
Type of lubrication	Grease / Oil lubrication
Max. permissible fluid temperature	105 °C
Nozzle position	In-line
Maximum rated pressure (discharge)	PN 10, PN 16, PN 25
Pump set location	Dry installed
Shaft material	Carbone Steel, Stainless Steel
Suction characteristics	Non-priming
Suitable for drinking water	Yes
Type of casing	Volute casing
Type of Impeller	Closed, Radial
Type of connection	Flange
Casing material	Cast Iron, Ductile Cast Iron, Carbon Steel
Maximum Head	200 m
Minimum Head	7 m
Installation position	Horizontal or Vertical
Shaft seal type	Gland packing, Mechanical seal
Main applications	Industry and process Engineering, Building services, Water supply, Energy
Maximum discharge-side pressure	25 bar
Maximum drive rating	350 kW (and more on request)
Type of installation
TMaximum flow rate	3600 m³/h (and more on request)
Minimum flow rate	90 m³/h
Maximum speed of rotation	3500 1/min

Related products

High Pressure Pump (ISO 5199)

Horizontal or vertical, long or close-coupled,
multistage centrifugal pump in ring-section design,
with axial or radial suction nozzle, cast radial impellers.

Add to cart

Quick view

Pump type BB1– According to API 610

Horizontal, axially split, one-and two stage between bearings
Double suction impeller
Single or double volute, depending on size
Diffuser or overflow piece after first stage for two stage execution
Driving from both sides possible
Mechanical seals (single, double, tandem)
Oil lubricated rolling bearings with rotor located by the non drive end for residual hydraulic axial thrust from hydraulically balanced impeller
Radial as well as axial loads can be also taken by oil lubricated bearings

Three-Phase Electro Motors With Cast-Iron Frame

Dimension-Frame Size 100-160 (Foot mounting )

FRAME No. IEC	D	F	GA	DH	EH	E	L	X	I	Q	Z	AC	HA	LK	AA	A	AB	KB	K	BA	B	c	H	HD
I00L	28	8	31	MIO	22	60	367	Pq16	197	67	109	197	14	40	47	160	200	17	12	40.5	140	63	100	268
I00L	28	8	31	MIO	22	60	367	Pq16	112L	67	109	197	14	40	47	160	200	17	12	40.5	140	63	100	268	28	8	31	MIO	22	60	386	Pql6	200	70	109	221	15	40	61	190	235	17	12	40.5	140	70	112	291.5
132M	38	10	41	M12	28	80	487.5	Pq2l	112L	258	84	139	257	15	56	62	216	260	17	12	48.5	178	89	132	28	8	31	MIO	22	60	386	Pql6	200	70	109	221	15	40	61	190	235	17	12	40.5	140	70	112	291.5	337.5
132M	38	10	41	M12	28	80	487.5	Pq2l	160L	258	84	139	257	15	56	62	216	260	17	12	48.5	178	89	132	42	12	45	M16	36	110	629	Pq29	345	111	170	303	20	80	74	254	320	21	14	56	254	108	160	391	337.5

Parker Hydraulic Cylinder

Model :	-
Description :	PARKER Hydraulic Cylinder, Powerful, Very accurate and fast, professional and High strength, high quality, the ability to work in extreme conditions, ideal for complex tasks, High pressure, these Cylinders in sizes offered these cylinders are offered in different sizes
Company name :	Padideh Hydraulic & Pneumatic
Packaging :	Box
Minimum order :	1
Standard :	-
Production power :	100
Payment type :	Cash
Source :	www.hydpne.com

Single Phase Double Capacitor Electro Motors

Dimension (Foot mounting - Flange mounting)

Frame No.IEC	T	S	P	N	M	LA	AK	HD	H	C	B	BA	K	KB	AB	A	AA	HA	AC	Z	Q	L	E	EH	DH	GA	LK	F	D	FLANGE SYS.IEC 72-1
56	3	7	120	80	100	8	210	145	56	36	71	19	6	10	112	90	22	10	106	76	55.5	-	20	-	-	10.2	12	3	9	FF100
63	3	10	140	95	115	10	212	158	63	40	80	25	7	10	125	100	25	10	123	76	54.5	-	-	-23	-	12.5	12	4	11	FF115
71	3.5	10	160	110	130	10	220	175	71	45	90	18	7	10	140	112	28	11	138	76	58	283	30	-	-	16	18	5	14	FF130
80	3.5	12	200	130	165	12	260	194	80	50	100	25	10	14	160	125	35	11	156	96	68.5	331	40	-	-	21.5	25	6	19	FF165
90L	3.5	12	200	130	165	12	274	215	90	56	125	30	10	14	182	140	43.3	12	175	96	70.5	380	50	19	M8	27	32	8	24	FF165
100L	4	15	250	180	215	12	290	233	100	63	140	35	12	17	200	160	40	12	194	96	73.5	428	60	22	M10	31	40	8	28	FF215
112M	4	15	250	180	215	12	300	256	112	70	140	35	12	17	235	190	45	13	217	96	76.5	440	60	22	M10	31	40	8	28	FF215

Three Phase One Speed Electro Motors With Aluminum Frame

Dimension (Foot mounting)

Frame No.IEC	HD	H	C	B	BA	K	KB	AB	A	AA	Z	HA	AC	Q	I	L	E	EH	DH	GA	LK	F	D
56	145	56	36	71	19	6	10	112	90	22	76	10	106	55.5	-	189	20	-	-	10.2	12	3	9
63	158	63	40	80	25	7	10	125	100	25	76	10	123	54.5	-	214	23	-	-	12.5	12	4	11
71	175	71	45	90	18	7	10	140	112	28	76	11	138	58	-	241	30	-	-	16	18	5	14
80	194	80	50	100	25	10	14	160	125	35	96	11	156	68.5	-	276	40	-	-	21.5	25	6	19
90L	215	90	56	125	30	10	14	182	140	43.3	96	12	175	70.5	-	325	50	19	M8	27	32	8	24
100L	233	100	63	140	35	12	17	200	160	40	96	12	194	73.5	-	366	60	22	M10	31	40	8	28
112M	256	112	70	140	35	12	17	235	190	45	96	13	217	76.5	200	384	60	22	M10	31	40	8	28
132M	291	132	89	178	40	12	17	260	216	44	116	14	255	90	258	486	80	28	M12	41	56	10	38
160L	340	160	108	254	50	15	21	315	254	64	116	16	303	95.5	345	629	110	36	M16	45	80	12	42