$0.00
Model 65mm & also other models can use for various type of seeds like sunflower , sesame , olive , coconut & etc.
Any way if you like to have small business or make your own family oil usage by yourself this can be best choice for you .
By this press you can produce 100% natural virgin vitamin edible oil in your factory , house , store , garage or any place you like.
This model comes panels, countertops and equipped with shock-resistant cyclo gearbox will be offered.
The device is provided with the electrical cabinet table, stainless steel and suitable for use in small workshops or their treatments during processing units.
Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.
Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.
| Swing over bed | mm | 420 |
| Swing over cross slide | mm | 240 |
| Distance between centers | mm | 520 |
| Chuck size | mm | 200 (8") |
| Bed slant | 45° | |
| Spindle nose | A2-6 | |
| Spindle bore | mm | 66 |
| Bar capacity | mm | 51 |
| Spindle speed range | r.p.m | 29 — 4500 |
| Spindle motor | Kw (std) | 15 |
| Inner diameter of spindle bearing in front | mm | 100 |
| Type of turret Hydraulic | VDI | 30 |
| No. of tools | 12 | |
| Dimension of tool shank | mm | 20x20 |
| Cross travel (X-axis) | mm | 200 |
| Longitudinal travel (Z-axis) | mm | 400 |
| Rapid traverse | M/mm | X:24 2:30 |
| Tailstock traverse | mm | 350 |
| Tailstock quill traverse | mm | 60 |
| Tailstock quill diameter | mm | 60 |
| Tailstock quill taper | MT | #4 |
| Coolant pump motor | HP | 1.7 |
| Hydraulic pump motor | HP | 2 |
| SIEMENS SINUMERIK | 828D | |
| Spindle motor (SIMOTIC M) | Kw /Nm/ rpm | | 12/120 / 1000 |
| Servo motor & drive (X-axis) (SINAMIC $120) | N.M / rpm | 11 / 3000 |
| Servo motor &d rive (Z-axis) (SINAMIC S120) | | N.M/rpm | 11/3000 |
| Weight | Kgs | 4100 |
| Packing (L.W.H) | Cm | 364 185x200 |
| Swing over bed | mm | 528 |
| Swing over cross slide | mm | 370 |
| Distance between centers | mm | 8/5 |
| size of hydraulic Chuck | mm | 254 (10") |
| Spindle nose | A2-8 | |
| Spindle bore diameter | mm | 92 |
| Feed Bar capacity | mm | TS |
| Spindle speed range | rpm | 20~3000 |
| Spindle motor (Mo) | Kw | 13.5 |
| Inner diameter of spindle bearing in front | | mm | 130 |
| Type of Turret | Hydraulic | Angle |
| NO, of tool Holder Ha | 12 — Z | |
| Dimension of tool shank | mm | 25x25 |
| Cross travel (X-axis) | mm | 290 |
| Cross travel (Z-axis) | M/min | 1050 |
| Rapid traverse | M/min | X:20 Z: 24 |
| Type of Tailstock | Hydraulic | Angl. |
| Tailstock traverse | mm | 530 |
| Tailstock quill storke | mm | 100 |
| Tailstock quill diameter | mm | 85 |
| Tailstock quill taper (STD) | MT | #5 |
| SIEMENS SINUMERIK 828D | ||
| Spindle motor (SIMOTIC M) | Kw /Nm/rpm | 15/95 / 1500 |
| Servo motor(X-axis) (Mo) | Kw /Nm/ rpm | 3.3/ 16 / 3000 |
| Servo motor(Z-axis) (Mo) | Kw /Nm/rpm | 3.8/ 18 / 3000 |
| El. motor | HP | 1.7 |
| El. motor | HP | 2 |
| Weight | Kgs | 6200 |
| Dimension (L.W.H) | Cm | 418x203x236 |
| TECHNICAL SPECIFICATIONS OF VERTICAL MACHINES CENTRE VMC850 , VMC1050 , VMC1250 | |||||
| ITEM \ MODEL | UNIT | VMC 850 | VMC 1050 | VMC 1250 | |
| Table workinq surface | mm | 500 x 1000 | 500 x 1200 | 500 x 1220 | |
| Lonqitudinal travel (X) | mm | 800 | 1050 | 1143 | |
| Cross travel (Y) | mm | 500 | 530 | ||
| Vertical travel (Z) | mm | 610 | 640 | ||
| Soindle nose to table | mm | 100-710 | 150-790 | ||
| Soindle center to column | mm | 550 | |||
| Soindle taper | mm | BT40 | |||
| Soindle speed | rpm | 60-8000 | |||
| Soindle motor | Kw | 9/12 | 9/12 (Hi-Low qear box) | ||
| Guideway | Linear quide way | Box way | |||
| X-Y-Z Rapid traverse | m/min | 36/36/30 | 30/30/20 | ||
| Servo motor(X, Y, Z axes) (Mo) | Nm I rpm | 16 / 3000 | |||
| Coolant pump motor | 2.1HP (P:3.5kq/Cm2,Q100L/min) | ||||
| Tool chanqer & Tool Maqazine type | Umbrella I Pneumatic | ||||
| Cuttinq feed | mm/min | 1-8000 | |||
| No. of tools | 24 | ||||
| Adiacent oockets max. tool dia. | mm | 75 | |||
| Max. tool dia.(without Adiacent tools) | mm | 100 | |||
| Max. tool lenath | mm | 320 | |||
| Max. tool weiqht | Kq | 10 | |||
| Table load caoacitv | Ka | 600 | 800 | 1500 | |
| Machine weiqht | Kq | 5500 | 6000 | 7270 | |
| Floor soace | mm | 2350x 3200 | 2920x 3200 | 2800x 3300 | |
| mm | 030 | 040 | |||
| X-Y-Z Ball scre | w dia. | ||||
| Cutting Capacity For CK45 | Millina | mm | 120 cc/min | 180 cc/mm | |
| Drillina | mm | 030 | 040 | ||
| Taooina | M30 x P3.5 | ||||
| Power suoolv | 380V-50Hz-3oh | ||||
| Possible for 4th axis | Yes | ||||
| Table working area | mm | 450 x 1600 |
| Table surface load | Kg | 1500 |
| Table rotation in both sides | Deg. | 45 |
| Table longitudinal travel (X) | mm | 1320 |
| Table cross travel (Y) | mm | 345 |
| Knee vertical travel (Z) | mm | 630 |
| Manual Head cross travel (W) | mm | 900 |
| spindle drive power | Kw | 11 |
| Tool taper | ISO | 50 |
| Speeds range | rpm | 28 — 1400 |
| Longitudinal and cross feeds | mm/min | 16 — 800 |
| Vertical feed rate | mm/min | 5 — 250 |
| Drive feed power | Kw | 2.2 |
| Rapid longitudinal and cross travel | mm/min | 3150 |
| Rapid vertical travel (Z) | mm/min | 1000 |
| Power capacity | Kw | 26 |
| Weight | Kg | 4920 |
| TECHNICAL SPECIFICATIONS OF VERTICAL MACHINES CENTRE VMC850 , VMC1050 , VMC1250 | |||||
| ITEM \ MODEL | UNIT | VMC 850 | VMC 1050 | VMC 1250 | |
| Table workinq surface | mm | 500 x 1000 | 500 x 1200 | 500 x 1220 | |
| Lonqitudinal travel (X) | mm | 800 | 1050 | 1143 | |
| Cross travel (Y) | mm | 500 | 530 | ||
| Vertical travel (Z) | mm | 610 | 640 | ||
| Soindle nose to table | mm | 100-710 | 150-790 | ||
| Soindle center to column | mm | 550 | |||
| Soindle taper | mm | BT40 | |||
| Soindle speed | rpm | 60-8000 | |||
| Soindle motor | Kw | 9/12 | 9/12 (Hi-Low qear box) | ||
| Guideway | Linear quide way | Box way | |||
| X-Y-Z Rapid traverse | m/min | 36/36/30 | 30/30/20 | ||
| Servo motor(X, Y, Z axes) (Mo) | Nm I rpm | 16 / 3000 | |||
| Coolant pump motor | 2.1HP (P:3.5kq/Cm2,Q100L/min) | ||||
| Tool chanqer & Tool Maqazine type | Umbrella I Pneumatic | ||||
| Cuttinq feed | mm/min | 1-8000 | |||
| No. of tools | 24 | ||||
| Adiacent oockets max. tool dia. | mm | 75 | |||
| Max. tool dia.(without Adiacent tools) | mm | 100 | |||
| Max. tool lenath | mm | 320 | |||
| Max. tool weiqht | Kq | 10 | |||
| Table load caoacitv | Ka | 600 | 800 | 1500 | |
| Machine weiqht | Kq | 5500 | 6000 | 7270 | |
| Floor soace | mm | 2350x 3200 | 2920x 3200 | 2800x 3300 | |
| mm | 030 | 040 | |||
| X-Y-Z Ball scre | w dia. | ||||
| Cutting Capacity For CK45 | Millina | mm | 120 cc/min | 180 cc/mm | |
| Drillina | mm | 030 | 040 | ||
| Taooina | M30 x P3.5 | ||||
| Power suoolv | 380V-50Hz-3oh | ||||
| Possible for 4th axis | Yes | ||||
Reviews
There are no reviews yet.