Showing all 12 results

Axial Evaporative Cooler SE310

$0.00
Power Supply 220 - 240,50 v~Hz   110 - 120,60 v~Hz
Current(high mode) 0.77 A  1.6 A
Energy class  A  A
Length 650 mm   650 mm
Width 650 mm   650 mm
Height  780 mm   780 mm
Net Weight  30 kg   30 kg
Gross Weight  31 kg  31 kg
Water Inlet  1/6 inch  1/6 inch
Electro static painting  √  √
Metal Type Galvanized Galvanized
Cooling pad type Wood wool pad Wood wool pad
Capacity 1630 cfm 1630 cfm
Power of electro-pump  1/60 hp   1/60 hp
Power of electro-motor  1/10 hp   1/10 hp
Function type Axial fan Axial fan
Water volume  33 lit   33 lit

Cold Plasma for Food Processing

$0.00

Introduction

Cold Plasma for Food Processing works based on a novel non-thermal food processing technology that uses energetic and reactive gases for mild surface decontamination of foods and packaging materials. In this system, dielectric barrier discharge (DBD) is used as a common method for generation of non-thermal plasma. DBD is electrical discharge between two electrodes which at least one of them is covered by an insulating dielectric barrier. Applying high voltage alternating current leads to the non-thermal DBD plasma generation at atmospheric pressure.

Evaporative Air Cooler Down-Draft

$0.00
The Evaporative Air Cooler model NTAC3/150D is the first evaporative air cooler produced in Iran. This unit with its unique design has wide use in both household and industrial applications. The polymer body and dramatic weight loss of the device make it resistant to atmospheric conditions and direct light exposure. Using the Higher-efficiency of cellulose evaporative cooling pads causes a high absorbent (water) so adequate cooling will be provided. Moreover, it isn’t necessary to replace the swamp cooler pad each year. The existence of a drain pump in this unit provides the user to drain water automatically in areas with very hard water.

Evaporative Air Cooler Side-Draft

$0.00
The Evaporative Air Cooler model NTAC9/180F is the first evaporative air cooler produced in Iran. This unit with its unique design has wide use in both household and industrial applications. The polymer body and dramatic weight loss of the device make it resistant to atmospheric conditions and direct light exposure. Using the Higher-efficiency of cellulose evaporative cooling pads causes a high absorbent (water) so adequate cooling will be provided. Moreover, it isn’t necessary to replace the swamp cooler pad each year.

Evaporative Air Cooler Up-Draft

$0.00
The Evaporative Air Cooler model NTAC9/180U is the first evaporative air cooler produced in Iran. This unit with its unique design has wide use in both household and industrial applications. The polymer body and dramatic weight loss of the device make it resistant to atmospheric conditions and direct light exposure. Using the Higher-efficiency of cellulose evaporative cooling pads causes a high absorbent (water) so adequate cooling will be provided. Moreover, it isn’t necessary to replace the swamp cooler pad each year. The existence of a drain pump in this unit provides the user to drain water automatically in areas with very hard water.

Evaporative Cooler SE280

$0.00

Power Supply

220 - 240,50 v~Hz   110 - 120,60 v~Hz
Current(high mode) 0.9  A

 2.3  A

Current(low mode)

0.7  A  1.8  A
Energy class  D

 D

Length

 500 mm   500 mm
Width  500 mm

  500 mm

Height

 500 mm   500 mm
Net Weight  21 kg

  21 kg

Gross Weight

 21 kg  21 kg
Water Inlet  1/4 inch

 1/4 inch

Electro static painting  √  √

Metal Type

Galvanized Galvanized
Cooling pad type Wood wool pad

Wood wool pad

Air outlet dim 230 x 255 230 x 255
Capacity  900 cfm

1080 cfm

Maximum power of blowing

 1530 m³/h

  1530 m³/h

Power of electro-pump

 1/60 hp   1/60 hp
Power of electro-motor  1/3 hp

  1/3 hp

Function type

Centrifugal

Centrifugal

Water volume

 22 lit

  22 lit

Evaporative Cooler SE320

$0.00
Power Supply 220 - 240,50 v~Hz   110 - 120,60 v~Hz
Current(high mode) 2.2  A  4.3  A
Current(low mode) 1.8  A  3.5  A
Energy class D D
Length 650 mm   650 mm
Width 650 mm   650 mm
Height 770 mm   770 mm
Net Weight  43 kg   43 kg
Gross Weight  44 kg  44 kg
Water Inlet  1/4 inch  1/4 inch
Electro static painting  √  √
Metal Type Galvanized Galvanized
Cooling pad type Wood wool pad Wood wool pad
Air outlet dim 300 x 300 300 x 300
Capacity 1850 cfm 1850 cfm
Power of electro-pump  1/60 hp   1/60 hp
Power of electro-motor  1/3 hp   1/3 hp
Function type Centrifugal Centrifugal
Water volume  33 lit   33 lit

Evaporative Cooler SE400-UD

$0.00
Power Supply 220 - 240,50 v~Hz   110 - 120,60 v~Hz
Current(high mode) 2.6 A  5.2  A
Current(low mode) 1.2  A  2.3  A
Energy class D D
Length 730 mm   730 mm
Width 730 mm   730 mm
Height 870 mm   870 mm
Net Weight  49 kg   49 kg
Gross Weight  50 kg  50 kg
Water Inlet  1/4 inch  1/4 inch
Electro static painting  √  √
Metal Type Galvanized Galvanized
Cooling pad type Wood wool pad Wood wool pad
Air outlet dim 350 x 345 350 x 345
Capacity 2800 cfm 3360 cfm
Power of electro-pump  1/60 hp   1/60 hp
Power of electro-motor  1/3 hp   1/3 hp
Function type Centrifugal Centrifugal
Water volume  46 lit   46 lit

Evaporative Cooler SE500B

$0.00
Power Supply 220 - 240,50 v~Hz   110 - 120,60 v~Hz
Current(high mode) 4.1  A  8.1  A
Current(low mode) 1.8  A  3.5  A
Energy class B B
Length 870 mm   870 mm
Width 870 mm   870 mm
Height 1030 mm   1030 mm
Net Weight  74 kg   74 kg
Gross Weight  75 kg  75 kg
Water Inlet  1/4 inch  1/4 inch
Electro static painting  √  √
Metal Type Galvanized Galvanized
Cooling pad type Wood wool pad Wood wool pad
Air outlet dim 490 x 480 490 x 480
Capacity 3900 cfm 4860 cfm
Power of electro-pump  1/60 hp   1/60 hp
Power of electro-motor  1/2 hp   1/2 hp
Function type Centrifugal Centrifugal
Water volume  66 lit   66 lit

Evaporative Cooler SE600-UD

$0.00
Power Supply 220 - 240,50 v~Hz   110 - 120,60 v~Hz
Current(high mode) 3.8 A  7.5 A
Current(low mode) 1.7 A  3.3 A
Energy class D D
Length 870 mm   870 mm
Width 870 mm   870 mm
Height 1030 mm   1030 mm
Net Weight 75 kg 75 kg
Gross Weight 76 kg 76 kg
Water Inlet  1/4 inch  1/4 inch
Electro static painting  √  √
Metal Type Galvanized Galvanized
Cooling pad type Wood wool pad Wood wool pad
Air outlet dim 490 x 480 490 x 480
Capacity 4000 cfm 4800 cfm
Power of electro-pump  1/60 hp   1/60 hp
Power of electro-motor  1/3 hp   1/3 hp
Function type Centrifugal Centrifugal
Water volume  66 lit   66 lit

Fan

$0.00

product specification

  • Industrial Wall Fans appropriate for exposed outdoor use
  • aluminum blades
  • 110 to 220W Power consumption
  • on 24 inch (600mm), 26 inch (650 mm) and 30 inch (750 mm) outer diameters
  • 3 speed settings
  • 11000-1400 rpm speed
  • volume air-flow rate is 100 (CBM/Hr)

Luna Wall Fan

product specification

  • motor with 90w power
  • Copper Winding
  • high strength and safety
  • 5 Speed Adjustable
  • 56 inch
  • With 3 stainless steel blades
  • containing a standard product safety certification